Trains.com

Single track non-loop wiring ?

1984 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2004
  • From: N. Calif.
  • 119 posts
Single track non-loop wiring ?
Posted by Boonter on Saturday, October 9, 2010 3:28 PM

I have an area on my layout where a single line would look great.  I do not wannt a loop, just lionel bumpers at each end.  Power source a seperate transformer.

Is this possable and if so is a wiring diagram avaible?  I have VERY LITTLE experience wiring layouts and haven't found any info in the Klambach books I have on hand.

Any and all help or comments appreciated.

Cheers & Talleyho !
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Saturday, October 9, 2010 4:23 PM

It's no different from wiring a loop.  Are you perhaps looking for something to reverse a train automatically?

Bob Nelson

  • Member since
    January 2009
  • 272 posts
Posted by Civil War on Saturday, October 9, 2010 5:26 PM

Normal 0 At the risk of hijacking Boonter's posting, I have thought of adding a non-loop trolley line with bumpers at each end. I would like to run one of the nice new trolleys available today and have an automatic reversing system. I don't want the trolley to hit the bumpers, just get close then stop and go the other way. I guess I need a circuit that will cut the power to the trolley long enough to operate the reversing circuit in the car's engine then restore the power to send it on to the other end and repeat this endlessly. Any suggestions on how to do that?

 

Terry Thomann Fredericksburg, Virginia That is me on the left. My brother got the train TCA 09-64381

  • Member since
    January 2004
  • From: N. Calif.
  • 119 posts
Posted by Boonter on Saturday, October 9, 2010 6:35 PM

Bob, here my lack of knowledge about track circutry shows !  If I have a single run of track, open at both ends, with a wire lock on will the train/trolly operate ?  I too want a trolly running back and forth, but will be happy with bumpers at both ends.

 

Cheers & Talleyho !
  • Member since
    November 2003
  • From: FL
  • 134 posts
Posted by hrin on Saturday, October 9, 2010 9:40 PM

Yes. It will work as you describe.

May want to put that lock on somewhere near the middle of the run, so you get a nice even speed at both ends. Remember if you are using the bump and go trolley type, repeated bumps can loosen your track. So whatever track you use, may want to put a few screws down to keep it from coming loose.

 

 

Boonter

Bob, here my lack of knowledge about track circutry shows !  If I have a single run of track, open at both ends, with a wire lock on will the train/trolly operate ?  I too want a trolly running back and forth, but will be happy with bumpers at both ends.

 

  • Member since
    January 2004
  • From: N. Calif.
  • 119 posts
Posted by Boonter on Sunday, October 10, 2010 2:59 PM

Many thanks for the help.  I count on this forum to educate and entertain me.  Both goals are always met.

Cheers & Talleyho !

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month