MTH premier truck with EOT device

[JeffPo]

I know this is an old post, but thought I'd reply given I have one.  I installed mine on a Lionel Central New Jersey caboose.  The original back truck didn't have a coupler and I thought this would spice it up a bit.

Nice flashing red light, with a bit of a pulse to it.  Here's a video:

 http://www.jeffpolston.com/CNJcaboose3.avi

 

 

[wsdimenna]

they don't fit the  lionel intermodels, unless you mean with the black windshield tape.. Any photos of how you did that?

 

Bill d 

[Dub]

I don'r know about the item itself but I photograghed a red LED and turn yellow in the picture. The real devices I have seen are red. I don't know the flash rate but I would say less than 60 flashes per minute.

[ChiefEagles]

Don is right.  Some MTH cars can not use the same screws that hold the truck on.  I my case, I use that sticky black windshield sealing rope.  A tiny piece will hold the truck on with no problem.  They will also fit LIONELS.

[dbaker48]

 Doug,

I picked one up, you need to remove the truck on which ever car you are going to install it on.  I picked a container stack car.  The problem for me was that the new truck requires screws from the top, the stack car has a piece that screws from the bottom.  Unfortunately, they both cant be secured because of interference.  I choose to secure the truck in place, and just set the car cover on top.

The light does flash, has a strobe light affect, pretty bright as well.  Cannot adjust the frequency of flashes, but overall I am satisfied with it.

[cnw1995]

I noticed the photo in the Dec. CTT. Has anyone installed one of these? It is a truck with a pick-up roller and a yellow EOT. What does the EOT too - flash or just shine continuously? Is it adjustable somehow?