Need to have a member contact me

[Dr.Fu-Manchu]

The Doctor is in !!!! I was emailed by dunkiii about trying to get his stockyard to work. dunkiii, I will give you a quick runthru of the wire rigging and then you can email me at the addy I will post at the end of my missive. First: you have to attach track to the platform. Second: you attach a lockon to the track, running the wire on the outside clip(right side as you face the track) to the ground post on the platform. Third: the wire from the inner clip(left side of lock on)will run to a lionel #364C-1 switch or a simple on/off switch. attach the wire to the right side of the switch and the left side to the insulated post on the platform. This completes the hook up. You will need a stock car to complete the circuit. When you flip the switch, the cows should vibrate thru the car and onto the platform. Of course, this happens if all is working properly! I am assuming you have the 1950(and after) platform, I ask this because the 1949 is different(I have both) The posts are on the left side and the right side on the 1949 model. the ground post is the rear one and the ins. post is the trackside one.  Email me at [e-mail] and we can talk about sending the papers you were asking about.

Till My Next Missive, I Remain The Humble Yet Strangly Evil Doctor!!!!