Trains.com

Chuffing failure

492 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Chuffing failure
Posted by Anonymous on Saturday, December 3, 2005 2:45 PM
Howdy folks,
I have a Lionel E6 Atlantic with TMCC from 1999. It chuffed fine when I first got it but has since stopped. It occasionally will let out a chuff then go silent again. I don't have TMCC on my layout. Is this partial soundboard failure or is it a sound I can reprogram using TMCC? The whistle still works.

Bruce Webster
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Saturday, December 3, 2005 2:51 PM
It's probably a bad chuff switch. Some engines use a small switch tied in with the smoke unit lever to activate the chuff. Because of their position, these switches have been known to get saturated with smoke fluid and stop working. If you call Lionel, they will probably send you a replacement, no questions asked. They can be replaced in a few minutes if you know how to solder. I've had to do it a couple of times on one of my K-line engines.
Ben TCA 09-63474
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, December 3, 2005 6:08 PM
Thanks Ben
I appreciate the advice. I'll look into this ASAP and report my findings.

Bruce Webster

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month