Trains.com

"There's no such thing as a stupid question"

1127 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
"There's no such thing as a stupid question"
Posted by Anonymous on Saturday, April 8, 2006 10:41 PM
Please remember that 30 seconds from now![:)]

What determines the set up of engines on any given train? I'm grasping the horsepower per ton ratio, but the more pics I look at the more different combinations I see. Forward A/reverseA, ForwardA/ForwardA, standard ABA, ABBB, 2forward, one reverse, 1forward/2reverse, on and on and on. I'm sure there's a method to the madness, but I sure don't know it!

Also (I hate to admit) What kind of transmission set up do they have that I assume allows them equal power forward or reverse?

Thanks for helping a newbie!
  • Member since
    September 2003
  • From: California - moved to North Carolina 2018
  • 4,422 posts
Posted by DSchmitt on Sunday, April 9, 2006 5:47 AM
The individual unit doesn't "care" which direction it is facing, but the crew cares about which direction the lead unit faces.

So in a lot of cases it is probably just the way they happened to be facing. Why turn the units if it is not necessary?

If a loco consist is to be kept together it is most convient to have an "A" at each end facing in opposite directions. This was the "standard" in the earlier days.

One reason to purposely put two "A" facing the same direction in a train is avoid having to turn one if they are scheduled to take separate trains further down the line.

I tried to sell my two cents worth, but no one would give me a plug nickel for it.

I don't have a leg to stand on.

  • Member since
    November 2005
  • From: NYNH&H Norwich & Worcester MP21.7
  • 774 posts
Posted by David_Telesha on Sunday, April 9, 2006 5:58 PM
QUOTE: Originally posted by AydansPop

Please remember that 30 seconds from now![:)]

What determines the set up of engines on any given train? I'm grasping the horsepower per ton ratio, but the more pics I look at the more different combinations I see. Forward A/reverseA, ForwardA/ForwardA, standard ABA, ABBB, 2forward, one reverse, 1forward/2reverse, on and on and on. I'm sure there's a method to the madness, but I sure don't know it!

Also (I hate to admit) What kind of transmission set up do they have that I assume allows them equal power forward or reverse?

Thanks for helping a newbie!



Locomotives are not like your car's tranny.

The diesel engine powers a generator which sends electric to motors on the axles. THe electric motors do the work. Electric motors obviously can easily give equal power both directions.
David Telesha New Haven Railroad - www.NHRHTA.org

SUBSCRIBER & MEMBER LOGIN

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

FREE NEWSLETTER SIGNUP

Get the Classic Trains twice-monthly newsletter