Trains.com

Altoona

7805 views
35 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2018
  • 1,618 posts
Posted by Jones1945 on Monday, October 7, 2019 9:54 PM

BaltACD
Jones1945
Speaking of workplace relationship, a trainwreck happened in Springer, New Mexico, Sep 1956 comes to my mind. A Santa Fe Chief run head-on into a mail train. If I remember correctly, I read somewhere that the engineer on the Chief had a beef with the engineer on the mail train. Although it had nothing to do with the accident, it is noted by the related authorities during the investigation. 

https://dotlibrary.specialcollection.net/Document?db=DOT-RAILROAD&query=(select+3647) 

Thanks for the link, Balt. According to the record provided by the link above, the engine of the mail train was ATSF 30C/30B:

RailPictures.Net

The engine of the Chief was ATSF 41

RailPictures.Net

  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Monday, October 7, 2019 9:49 AM

Overmod

 

 
Flintlock76
You know Mr. Jones, that story about the engineers reminds me of one from military history.

 

What about Theobald and Buckner Jr. in the Aleutians?

 

Hmm, never heard of that one.

However, LtCommander Bulkeley in his book "They Were Expendable" mentions two US Army brigadier generals in the Phillipines during the Japanese invasion who'd hated each other since West Point and still  couldn't put their differences aside, even in the face of the Japanese onslaught.  He didn't give their names, wisely so.  Makes you wonder.  

OK, I just looked up Theobald and Buckner.  Looks like a classic personality clash between someone who wants to go out, kick-butt, and win (General Buckner) and another one who's more concerned with not losing than he is about winning (Admiral Theobald.)   Oh brother.  I won't bore everyone with the whole story.

  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Sunday, October 6, 2019 11:50 PM
 
 
 
 
 
 
Continued

 

 
 
 
 
 
Concluded
 
 
 
 
 
 

 

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Sunday, October 6, 2019 9:57 PM

Jones1945
Speaking of workplace relationship, a trainwreck happened in Springer, New Mexico, Sep 1956 comes to my mind. A Santa Fe Chief run head-on into a mail train. If I remember correctly, I read somewhere that the engineer on the Chief had a beef with the engineer on the mail train. Although it had nothing to do with the accident, it is noted by the related authorities during the investigation. 

https://dotlibrary.specialcollection.net/Document?db=DOT-RAILROAD&query=(select+3647)

Never too old to have a happy childhood!

              

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Sunday, October 6, 2019 1:32 PM

Flintlock76
You know Mr. Jones, that story about the engineers reminds me of one from military history.

What about Theobald and Buckner Jr. in the Aleutians?

  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Sunday, October 6, 2019 12:09 PM

Jones1945

 

 
Flintlock76

Wow, what is that thing?  It accelerated like a scalded cat, and then some!

Rough road indeed!  Reminds me of a story...

A railroad track maintanance foreman was riding in the cab when the engineer turned to him and said, "You know, it takes a lot of nerve to sit up here and run one of these things!"

"Really?"  said the foreman.  "It takes a lot  more nerve for me to sit up here and ride with you!"

"How so?"

 know what you're ridin' on!"

 

 

Love your story, Wayne. Smile Such a humorous way to teach that arrogant engineer a lesson, reminds him of the spirit of cooperation in railroading. The maintenance foreman ensures the train track is safe for every single train to run on it, the engineer ensures the train arrives at the destination safe and on time; everyone is equally important. Their salaries would be different though, but a person who is humble and helpful would bring him good things that money can't buy. 

Speaking of workplace relationship, a trainwreck happened in Springer, New Mexico, Sep 1956 comes to my mind. A Santa Fe Chief run head-on into a mail train. If I remember correctly, I read somewhere that the engineer on the Chief had a beef with the engineer on the mail train. Although it had nothing to do with the accident, it is noted by the related authorities during the investigation. 

 

You know Mr. Jones, that story about the engineers reminds me of one from military history.

Seems there were two Russian generals in the czarist era who hated each other from their service academy days, even going so far as to have a fist fight on a train station platform during the Russo-Japanese War.  Not proper behavior for generals, although I'm sure the troops got a kick out of it.

THEN they were teamed up at the start of World War One and told to attack into East Prussia.  They still couldn't get along and co-operate, and Von Hindenburg smashed them both! 

  • Member since
    April 2018
  • 1,618 posts
Posted by Jones1945 on Saturday, October 5, 2019 11:29 PM

Flintlock76

Wow, what is that thing?  It accelerated like a scalded cat, and then some!

Rough road indeed!  Reminds me of a story...

A railroad track maintanance foreman was riding in the cab when the engineer turned to him and said, "You know, it takes a lot of nerve to sit up here and run one of these things!"

"Really?"  said the foreman.  "It takes a lot  more nerve for me to sit up here and ride with you!"

"How so?"

 know what you're ridin' on!"

Love your story, Wayne. Smile Such a humorous way to teach that arrogant engineer a lesson, reminds him of the spirit of cooperation in railroading. The maintenance foreman ensures the train track is safe for every single train to run on it, the engineer ensures the train arrives at the destination safe and on time; everyone is equally important. Their salaries would be different though, but a person who is humble and helpful would bring him good things that money can't buy. 

Speaking of workplace relationship, a trainwreck happened in Springer, New Mexico, Sep 1956 comes to my mind. A Santa Fe Chief run head-on into a mail train. If I remember correctly, I read somewhere that the engineer on the Chief had a beef with the engineer on the mail train. Although it had nothing to do with the accident, it is noted by the related authorities during the investigation. 

  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Saturday, October 5, 2019 9:42 PM

Wow, what is that thing?  It accelerated like a scalded cat, and then some!

Rough road indeed!  Reminds me of a story...

A railroad track maintanance foreman was riding in the cab when the engineer turned to him and said, "You know, it takes a lot of nerve to sit up here and run one of these things!"

"Really?"  said the foreman.  "It takes a lot  more nerve for me to sit up here and ride with you!"

"How so?"

 know what you're ridin' on!"

  • Member since
    April 2018
  • 1,618 posts
Posted by Jones1945 on Saturday, October 5, 2019 7:02 PM

Overmod

The W-1 design has outside frames, and those leaf springs are functional suspension.  

Unlike the Roosen motor locomotive, which has outside motors and 'end drive' similar to quill drive on one end of each axle (the motors alternating by side), the W-1 motors are mounted centrally, between the drivers, with cylinders acting vertically past both the front and back sides of the axle.

Note the 55:19 gear ratio, which gives the equivalent of about 92 strokes per revolution per engine, but will force the engine to move at high cyclic rpm during any drifting.  Interesting to contemplate the high-speed-slipping potential of this engine in service.

  They have very little shock attenuation visible in their gear drive, and I can't imagine that maintaining the steam, exhaust, lube and control connections in that area, even with the skirts providing a partial low-pressure area (or with a full belly pan from pilot to ashpan), would have been a pleasant ongoing experience.  If only Emerson had lived a couple of years longer, or the war not intervened...

MEANWHILE does anyone here have data on the actual layout, design, or operation of the B&O's short flirtation with front-end stokers around the time we became involved in WWII?  Supposedly over 70 locomotives were so equipped ... yet I can't find any real technical discussion of either the approach or its implementation.  I have my suspicions on what happened, but I'd like to know more actual historical fact... 

Thanks, Overmod. That means the untouched up drawing I posted was actually showing the unfinalized W-1 without much detail of the Besler steam engine and the outside frame.

Four pairs of heavy steam motors like this mounted on the driving wheel axles without adequate shock-absorbing device, all of them would be bouncing with the axles when the driving wheels hitting the seams between the rail, switches ..... probably only works "better" on seamless rail I guess? CoffeeSurprise

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Saturday, October 5, 2019 9:06 AM

The W-1 design has outside frames, and those leaf springs are functional suspension.  

Unlike the Roosen motor locomotive, which has outside motors and 'end drive' similar to quill drive on one end of each axle (the motors alternating by side), the W-1 motors are mounted centrally, between the drivers, with cylinders acting vertically past both the front and back sides of the axle.

Note the 55:19 gear ratio, which gives the equivalent of about 92 strokes per revolution per engine, but will force the engine to move at high cyclic rpm during any drifting.  Interesting to contemplate the high-speed-slipping potential of this engine in service.

  They have very little shock attenuation visible in their gear drive, and I can't imagine that maintaining the steam, exhaust, lube and control connections in that area, even with the skirts providing a partial low-pressure area (or with a full belly pan from pilot to ashpan), would have been a pleasant ongoing experience.  If only Emerson had lived a couple of years longer, or the war not intervened...

MEANWHILE does anyone here have data on the actual layout, design, or operation of the B&O's short flirtation with front-end stokers around the time we became involved in WWII?  Supposedly over 70 locomotives were so equipped ... yet I can't find any real technical discussion of either the approach or its implementation.  I have my suspicions on what happened, but I'd like to know more actual historical fact...

  • Member since
    April 2018
  • 1,618 posts
Posted by Jones1945 on Saturday, October 5, 2019 3:55 AM

Miningman

Thanks a lot for these useful links, Vince. Those are some very high-quality photos of B&O's 4-4-4, 4-6-4 and 4-4-4-4!

 

https://collections.digitalmaryland.org/digital/collection/mdbo/search

First time ever looking at this untouched up conceptual drawing of The B&O Class W-1 Besler Type 4-2-2-2-2-4 (click to enlarge)! In other touched-up versions, there are four B&O logos on the journal box of the drivers on the streamlined shrouding, and the four individual “Besler” steam engine inside the skirt was interpreted as a leaf springs due to the shape of the Besler steam engine. In this "original" drawing, all Besler steam engines were covered by the skirt and visible from outside through the grills.

 

A Europe example, DRB Class 19.10

 

  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Friday, October 4, 2019 10:58 AM

That mention of the "Railroad Wonder Trip" reminded me of something.

I've got a superb DVD called "Northeastern Steam 1935-1937" where an NYC "Wonder Trip" is shown, also a few other rail enthusiasts trips as well, PRR, NH, and others. Restored footage and well done.

56 minutes long, it's available from Anchor Videos, http://www.train-video.com  

Here's the direct link, http://www.train-video.com/rvp202d.html  

I recommend it highly!

I've met the seller at a number of train shows, nice guy!

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Friday, October 4, 2019 7:24 AM

Miningman

The is the first I have EVER heard of this 16 cylinder steam project.

My father, being 14 at the time of the Fair of the Iron Horse, purchased a set of 'stereo slides' and the appropriate viewer that was sold about the event. I have the set and it is mostly complete (a slide ot two may be missing).  The location where I closed out my career was on the property where the Fair of the Iron Horse was held.

Never too old to have a happy childhood!

              

  • Member since
    August 2003
  • From: Collinwood, Ohio, USA
  • 16,367 posts
Posted by gmpullman on Saturday, August 31, 2019 3:09 AM

Miningman
Not to be outdone by Pennsy, the New York Central organizes a big railfan trip.

Wouldn't 'ya know. I happen to have the brochure from that trip Smile (no, sadly, I wasn't in attendance).

 NYC_Alco by Edmund, on Flickr

 NYC_Alco_0003 by Edmund, on Flickr

 NYC_Alco_0004 by Edmund, on Flickr

 NYC_Alco_0005 by Edmund, on Flickr

 NYC_Alco_0006 by Edmund, on Flickr

 NYC_Alco_0007 by Edmund, on Flickr

 NYC_Alco_0008 by Edmund, on Flickr

 NYC_Alco_0009 by Edmund, on Flickr

A wonderful time was had by all—

As far as I can discern this is the only recognizable remaining structure still standing from the Alco complex:

 Alco_site5 by Edmund, on Flickr

I have highlighted the same building in this aeroplane view:

 Alco_remains by Edmund, on Flickr

 A casino and brewery have recently been added to the site. Sad

Cheers, Ed

  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Friday, August 30, 2019 9:05 AM

Not to be outdone by Pennsy, the New York Central organizes a big railfan trip.

Beats them to the punch by a month.

 
 
  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Wednesday, August 28, 2019 11:34 PM

Fascinating.. good find! 

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Wednesday, August 28, 2019 9:47 PM

Some more of the story of that Model L (built 1941) including a picture of it in yellow (!) with Conrail lettering (!!)

https://yngfire.com/index.php?threads/pennsylvania-rr-fd-altoona-pa-1895-1985.12642/

Says they ran their Ahrens-Fox all the way to 1965!

  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Wednesday, August 28, 2019 3:46 PM

Wow!  A Mack pumper!

Even the PRR's Altoona Works Fire Department had pure class!

  • Member since
    August 2003
  • From: Collinwood, Ohio, USA
  • 16,367 posts
Posted by gmpullman on Wednesday, August 28, 2019 1:35 PM

Miningman
 A railfan dream.

I have a flyer from the Great Altoona Tour from the Chicago side:

 PRR_tour_cover by Edmund, on Flickr

 PRR_tour_inside by Edmund, on Flickr

 PRR_tour_back by Edmund, on Flickr


 

Another Altoona Treat!

 

 RR_views_0035 by Edmund, on Flickr

 RR_views_0034 by Edmund, on Flickr

Cheers, Ed

  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Wednesday, August 28, 2019 11:37 AM

It's all about the steam baby, all about the steam.

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Wednesday, August 28, 2019 11:33 AM

Miningman
A railfan dream.

And not a word about the pending electrification all the way to Harrisburg, and the DD2 being tested to optimize performance on it, or any of the pending thought even at that time to extend it over the mountains to Pittsburgh, prioritized as late as 1943...

  • Member since
    March 2016
  • From: Burbank IL (near Clearing)
  • 13,540 posts
Posted by CSSHEGEWISCH on Wednesday, August 28, 2019 10:18 AM

Agent: They hated you in Mechanicsville (D&H).

Burns:  But they loved me in Altoona.

Burns and Allen learned their craft the hard way on the vaudeville circuit, bombing in some places and wowing them in others.

The daily commute is part of everyday life but I get two rides a day out of it. Paul
  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Tuesday, August 27, 2019 9:45 PM
  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Saturday, August 3, 2019 6:44 PM
"In the twentieth century, the Pennsylvania Railroad often promoted itself as the "Standard Railroad of the World." Among its many achievements, it could claim, in 1945, over 16 percent of all passenger miles in the U.S. It was among the first to use coal-burning locomotives, steel rails, and air brakes; and its Altoona shops, the largest railroad-owned construction shops in the country, had been the training ground for many American railroad builders and engineers.The company saw itself as setting the "standard" by which all railroads should be run and against which all railroads might be measured. In another sense, however, the railroad, particularly in its shops at Altoona, pioneered in standardization itself. At Altoona, the railroad introduced standard car designs in 1859, standard locomotive classes in 1868, and, with the establishment of the first railroad test department in 1874, standard product specifications."

 

  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Saturday, August 3, 2019 2:47 PM
Altoona Tribune, Aug. 8, 1949
 
“An engineer from Denmark suggested that since the first railroad shop in the world had been built at Altona in that country, the new railroad town could well be named for it. The extra "o" made the name a bit more individual.”
  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Saturday, August 3, 2019 8:39 AM

Oh wow, "The Freight Wreck At Altoona!"

That old song's been part of a private joke between myself and Lady Firestorm since we read "Scalded To Death By The Steam," that history and anthology of classic train wreck songs.  Man, there used to be a LOT of them!

Joke goes like this...

"The Wreck Of The Old Number One."

"The Wreck Of The Old Number Two."

"The Wreck Of The Old Number Three."

"The Wreck Of The Old Number Four."  AND...

"The Freight Wreck At Altoona!"   

Spoken in a apropriately grim voice.

Mike strikes again!  Thanks Mike, and thanks Vince for passing it on!

Seems kind of up-beat for a wreck song though, doesn't it?

  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Saturday, August 3, 2019 12:42 AM

SUBSCRIBER & MEMBER LOGIN

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

FREE NEWSLETTER SIGNUP

Get the Classic Trains twice-monthly newsletter