Trains.com

ALCO "Code" Mystery

1793 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2001
  • From: Roanoke, VA
  • 2,015 posts
ALCO "Code" Mystery
Posted by BigJim on Tuesday, February 20, 2007 10:43 AM

Here's a mystery for you. I just purchased an old ALCO pamphlet (48 pgs.) about Pacific type locomotives. There is some text, some plans, and a lot of pictures w/specs much like the N&W builders cards.    

Here is the mystery. At the bottom of the first page it says; The Code Word for this Pamphlet is "CALLIGENIE".      

Also on each page with a loco picture it will say; Pacific Type Passenger Locomotive Built for the Missouri Pacific Railway CODE WORD "AGARROCHO". Each locomotive pictured will have a different 'code word'. Any ideas on what this is all about?

.

  • Member since
    December 2004
  • From: Shanksville PA
  • 311 posts
Posted by tsgtbob on Tuesday, February 20, 2007 2:54 PM
Jim, those code words were used for the old telex/teletype communications system, sort of a precursor to the fax machine of today.
Lima as well as most all manufacturers prior to the depression used them in their catalogs, as a part number could get scrambled during transmission, especally on international orders.
IRRC, the grates for a Shay were code worded "face of a dam"
The actual word, well, the forum software doesn't like it too well!
You know my e mail, if you are REALL courious about the code word, for a Shay's grates contact me!
  • Member since
    October 2006
  • 129 posts
Posted by Lost World on Tuesday, February 20, 2007 4:03 PM

That's a good question, with a good answer (I didn't know it).  I wondered the same thing many years ago while looking through Erie Power.  In the chapter on the Russian Decapods there is a technical drawing of the locomotive as rendered by Baldwin, with a code word--IBMEQEPFYZ--at the bottom.  Al Staufer--ever witty--wrote in the caption, "All those who can pronounce that code word, please raise your hands."  I found that rather hysterical; hell, it's still pretty funny.

Check out the Lost World at http://www.flickr.com/photos/lostworld/ (Use the www icon below)
  • Member since
    July 2005
  • From: In the New York Soviet Socialist Republic!
  • 1,391 posts
Posted by PBenham on Tuesday, February 20, 2007 4:27 PM

 tsgtbob wrote:
Jim, those code words were used for the old telex/teletype communications system, sort of a precursor to the fax machine of today.
Lima as well as most all manufacturers prior to the depression used them in their catalogs, as a part number could get scrambled during transmission, especally on international orders.
IRRC, the grates for a Shay were code worded "face of a dam"
The actual word, well, the forum software doesn't like it too well!
You know my e mail, if you are REALL courious about the code word, for a Shay's grates contact me!
Mischief [:-,]Smile,Wink, & Grin [swg]Mischief [:-,]Laugh [(-D] And there are those that say we're more inclined to think Censored [censored] nowadays!!

 

  • Member since
    April 2001
  • From: Roanoke, VA
  • 2,015 posts
Posted by BigJim on Wednesday, February 21, 2007 7:18 PM

Bob,

Thanks for the "Flash from the Past" on how things were done.

.

  • Member since
    February 2002
  • From: Mpls/St.Paul
  • 13,783 posts
Posted by wjstix on Thursday, February 22, 2007 8:06 AM
FWIW the pre-war Lionel toy train catalogues had similar code words for each product.
Stix

SUBSCRIBER & MEMBER LOGIN

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

FREE NEWSLETTER SIGNUP

Get the Classic Trains twice-monthly newsletter