Trains.com

Heat knocks out light rail

2311 views
11 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2014
  • 250 posts
Heat knocks out light rail
Posted by ORNHOO on Monday, June 28, 2021 5:40 PM

Tri-Met in Portland, OR shuts down MAX light rail trains due to 100 degree plus heat wave.

https://www.oregonlive.com/commuting/2021/06/trimet-suspends-max-wes-lines-until-tuesday-citing-heat-related-mechanical-issues.html

 

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Monday, June 28, 2021 5:44 PM

Reading between the lines, this is an electric-power thing more than an equipment operating-temperature thing.  Note that the buses keep running just fine.  Wonder if battery hybrids will do the same?

  • Member since
    December 2007
  • From: Georgia USA SW of Atlanta
  • 11,919 posts
Posted by blue streak 1 on Monday, June 28, 2021 6:07 PM

2 quick thoughts.  #1 Might be worry about rail kinks.  Wes rail probably that as it is not electrified.  #2  CAT might sag too much.  One of our posters will have to tell us if the lines are sagging and also how close to the ground the weights are ?

How are BNSF and UP dealing with the possibility of rail kinks ?

  • Member since
    May 2003
  • From: US
  • 25,279 posts
Posted by BaltACD on Monday, June 28, 2021 6:28 PM

blue streak 1
...

How are BNSF and UP dealing with the possibility of rail kinks ?

Heat Orders - Just like they do in known hot weather territory.

Never too old to have a happy childhood!

              

  • Member since
    December 2007
  • From: Georgia USA SW of Atlanta
  • 11,919 posts
Posted by blue streak 1 on Wednesday, June 30, 2021 4:21 AM

Not sure but one item on TV showed a CAT insulator fried.  Maybe CAT sagged too much and they had to turn off power ?

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Wednesday, June 30, 2021 6:47 AM

blue streak 1
Maybe CAT sagged too much and they had to turn off power ?

But isn't it constant-tension?

  • Member since
    November 2014
  • 250 posts
Posted by ORNHOO on Wednesday, June 30, 2021 1:02 PM

Overmod
But isn't it constant-tension?

Yes, the constant tension being maintained by counterweights on the suspension cables. Apparently, when Tri-Met engineered this system they did not take into account Global Warming, the suspension cable expands as the temperature increases, the couterweights are on the ground at temperatures above 100 degrees fahrenheit.

  • Member since
    May 2004
  • 7,500 posts
Posted by 7j43k on Wednesday, June 30, 2021 7:03 PM

Anyone think of digging a hole?

Apparently not.

Ed

  • Member since
    November 2014
  • 250 posts
Posted by ORNHOO on Thursday, August 12, 2021 6:25 PM

Temperatures are rising in the Portland area again: https://trimet.org/alerts/hotweather.htm

The counterweights are suspended between the webs of the "H" section catenary support poles. If Ed wants to volunteer to dig some holes they would have to be dug through the reinforced concrete footings for the poles. Engineered in the Holocene, operating in the Anthropocene.

  • Member since
    May 2004
  • 7,500 posts
Posted by 7j43k on Thursday, August 12, 2021 8:06 PM

ORNHOO

Temperatures are rising in the Portland area again: https://trimet.org/alerts/hotweather.htm

The counterweights are suspended between the webs of the "H" section catenary support poles. If Ed wants to volunteer to dig some holes they would have to be dug through the reinforced concrete footings for the poles. Engineered in the Holocene, operating in the Anthropocene.

 

 

I'd sure like to see a picture of that.  It SOUNDS like they placed the counterweights in an inaccessible location (between the webs).

 

Ed

  • Member since
    May 2003
  • From: US
  • 25,279 posts
Posted by BaltACD on Saturday, August 14, 2021 6:58 AM

ORNHOO
Temperatures are rising in the Portland area again: https://trimet.org/alerts/hotweather.htm

The counterweights are suspended between the webs of the "H" section catenary support poles. If Ed wants to volunteer to dig some holes they would have to be dug through the reinforced concrete footings for the poles. Engineered in the Holocene, operating in the Anthropocene.

Shorten the cable attaching the counterwights to the wire they are balancing.

Never too old to have a happy childhood!

              

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Saturday, August 14, 2021 7:22 AM

7j43k
 
The counterweights are suspended between the webs of the "H" section catenary support poles.

I'd sure like to see a picture of that.  It SOUNDS like they placed the counterweights in an inaccessible location (between the webs).

The amount of weight needed can be substantial (SCAT tension is 3000# on the trolley and 4500# on the messenger) and there are forces acting other than vertically on the suspending support.  The problem with SCAT is that it was largely designed to live between the double tracks, in what was already a minimum distance; accommodating the BWAs ('balance weight assemblies') partly within the h-beam channels makes engineering sense.

There are materials other than 'the usual' that could be used to increase the counterweight density (to permit a shorter vertical BWA stack height to facilitate Balt's suspension shortening -- keep in mind it will get cold again as winter comes); a secondary stack might be provided outboard of the pole in line with track to assist load; the mechanical advantage of the original stack suspension might be changed slightly from nominal 3:1) -- that sort of thing, far easier than machining a bunch of frogs and regauging/profiling a full set of mandatorily one-piece-cast wheels... 

...but this is a place where a core drill and some strategic chipping ought to have particular utility. I don't know the sag for an 'extra' 10 degrees as I don't know if SCAT divides the tensioning separately from the electrical sectionalization but the vertical change of the base of the BWAs can't be more than inches.  I am sure a circumferential metal liner, rubber moisture barrier, etc. can be provided to eliminate rain-drainage concerns.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy