Trains.com

Big boy

37549 views
190 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2005
  • From: Cardiff, CA
  • 2,930 posts
Posted by erikem on Wednesday, July 25, 2018 11:48 PM

FWIW, one of the last things that my dad's ship (USS Quest) did before it was decommisioned was to sweep for mines around Bikini in preparation for Operation Crossroads. He didn't say much about that aprt of his experience at sea, but did have a few stories of using up the butter stock before the ship was truned over to the Philippines.

 - Erik

P.S. He some interesting stories to tell about the various engines he worked on at Diesel Engineering school - Alco's, FM's, HOR's and a 24 cylinder GM (Winton).

  • Member since
    August 2010
  • From: Henrico, VA
  • 8,955 posts
Posted by Firelock76 on Sunday, July 29, 2018 11:44 AM

erikem

FWIW, one of the last things that my dad's ship (USS Quest) did before it was decommisioned was to sweep for mines around Bikini in preparation for Operation Crossroads. He didn't say much about that aprt of his experience at sea, but did have a few stories of using up the butter stock before the ship was truned over to the Philippines.

 - Erik

P.S. He some interesting stories to tell about the various engines he worked on at Diesel Engineering school - Alco's, FM's, HOR's and a 24 cylinder GM (Winton).

 

Erik, I've mentioned this in the past, and not being a genius I'm suprised no-one thought of it first, but I can't help but get the impression that one of the things, if not a major thing, that made the railroad's rapid transition from steam to diesel in the post-war years possible were all those thousands of diesel mechanics re-entering civilian life and looking for jobs who were trained courtesy of Uncle Sam.

To say nothing of electricians as well.

  • Member since
    December 2005
  • From: Cardiff, CA
  • 2,930 posts
Posted by erikem on Sunday, July 29, 2018 2:07 PM

Wayne,

Makes sense, especially with the 567's being used on a number of Navy ships. FWIW, my dad was a Lt jg when the Quest shipped out on V-J day and he had quite a few stories of what happened to the various supply dumps.

After his discharge, he spent a year teaching High School in his hometown and then went on to get a PhD in Biochemistry.

 - Erik

  • Member since
    August 2010
  • From: Henrico, VA
  • 8,955 posts
Posted by Firelock76 on Sunday, July 29, 2018 3:39 PM

Erik, I wouldn't be surprised to hear any of your father's supply dump stories.  From what I heard the amount of equipment of all kinds "trashed" had to be seen to be believed.   Everything from Stuart tanks to B-24's.  Unbelieveable. 

Wayne

  • Member since
    October 2006
  • 433 posts
Posted by ccltrains on Monday, July 30, 2018 7:06 PM

Thought this was a thread not the historical locomotive naming.  With this in mind I have a question.  The Big Boy is a large engine with limited line of sight for the engineer.  Nothing like the auto type of view an engineer has from today’s diesels.   My question is: will UP discretely install a tv camera to give the engineer a better view?

  • Member since
    August 2010
  • From: Henrico, VA
  • 8,955 posts
Posted by Firelock76 on Monday, July 30, 2018 9:05 PM

I wouldn't be surprised if they did, it wouldn't hurt, but I remember what old-time engineers said about limited line of sight in the steam days...

"It really doesn't matter, 'cause you can't stop on a dime anyway!"

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Monday, July 30, 2018 9:35 PM

ccltrains
Thought this was a thread not the historical locomotive naming.  With this in mind I have a question.  The Big Boy is a large engine with limited line of sight for the engineer.  Nothing like the auto type of view an engineer has from today’s diesels.   My question is: will UP discretely install a tv camera to give the engineer a better view?

4014 will have as good a view as it did in it's first day of revenue service.

I will say one thing however, Class 1 in the signal replacement programs for PTC have been installing signals on both the right and left sides of the track - in steam days all signals were installed on the right on engineers side of the track (except CNW who used the English left hand style of running) or on signal bridges above the tracks - right hand signals were viewable on the engineers side of the boiler.  When the 4014 returns to operation the Fireman will also have to view and call signals.

Never too old to have a happy childhood!

              

  • Member since
    October 2006
  • 433 posts
Posted by ccltrains on Tuesday, July 31, 2018 6:49 AM

Agreed that signals on both sides lets both front end personnel to see signals etc.  My concern is  the track immediately in front of the engine.  An obstruction on the track might not be able to be seen.  With the multi  rules covering everything I think the feds may require something dealing with forward viewing.  I know nothing is required for the excursion steam engines for forward viewing YET.  Being wall eyed is not the best way to see directly ahead.

  • Member since
    March 2012
  • 29 posts
Posted by Big Bill on Tuesday, July 31, 2018 5:31 PM

54light15

Maybe you're right, Firelock but I know some garment or another from Big 2 was called a bum freezer. 

Fascinating about U-boat crews wearing British battledress. I thought the crews wore mostly coveralls, I guess I need to see "Das Boot" again to be sure. 

One thing Arthur Godfey had in common with Captain Eddie, he was quailfied to fly multi-engined commercial aircraft. So was Danny Kaye. John Travolta we know about, I wonder who else? 

 

 

According to some people I knew in my youth who were navy pilots, a "Bum Freezer" was a fleece-lined jacket worn by fighter pilots. It was a waist length, leather jacket with enough room to let the pilots move as they needed to to fly in combat.

  • Member since
    September 2010
  • From: Parma Heights Ohio
  • 3,442 posts
Posted by Penny Trains on Tuesday, July 31, 2018 6:50 PM

Yep.  Line of sight really isn't worth much when there's thousands of tons behind you decending Sherman Hill.  All it's really good for is giving the crew a chance to pull down on the whistle lanyard in hopes of warning the obstruction off the tracks.  Which of course is useless anyways if the "obstruction" is a rockslide.

But even with all that, several railroads operated their diesels "long hood first" because that's what their engineers had become accustomed to: seeing the machine they were driving so they could detect mechanical issues as soon as possibe.

Trains, trains, wonderful trains.  The more you get, the more you toot!  Big Smile

  • Member since
    July 2016
  • 2,631 posts
Posted by Backshop on Tuesday, July 31, 2018 8:32 PM

ccltrains

Agreed that signals on both sides lets both front end personnel to see signals etc.  My concern is  the track immediately in front of the engine.  An obstruction on the track might not be able to be seen.  With the multi  rules covering everything I think the feds may require something dealing with forward viewing.  I know nothing is required for the excursion steam engines for forward viewing YET.  Being wall eyed is not the best way to see directly ahead.

 

If the object on the tracks is that close to the front of the locomotive, there's nothing the crew could do anyways.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy