Login
or
Register
Home
»
Trains Magazine
»
Forums
»
General Discussion
»
Defect Detectors
Edit post
Edit your reply below.
Post Body
Enter your post below.
yep, you guessed it right, that is a high/wide detector. More than likely there is a truss <br />bridge(s) somewhere around there not too far from the detector and even though it's mostly coal and grain, there is some general stuff on that line and all it takes to do some real damage to a bridge is one time, so it's a useful item to have, especially if the bridge doesn't have an awful lot of clearance where it wouldn't take much of a shift to smack it. that detector works by if something hits those wires hard enough to rip 'em off, it triggers, then a signal maintainer has to come out and put in new wires. this is the less expensive version (probably due to a lack of a lot of shiftable traffic as you noted) the other version uses an optical or laser sensor which doesn't require reseting after tripping, so i figure they're (UP) not expecting anything to trip it very often. later <br />derek
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
Update Reply
Join our Community!
Our community is
FREE
to join. To participate you must either login or register for an account.
Login »
Register »
Search the Community
Newsletter Sign-Up
By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our
privacy policy
More great sites from Kalmbach Media
Terms Of Use
|
Privacy Policy
|
Copyright Policy