Maybe the practice is out-of-date, but do railroads still have an aversion to displaying a time value at the top-of-the-hour?
Let me better explain by means of an example.
A maintenance of way foreman may want to have a train dispatcher issue a Form B track bulletin the next day to protect his men and machines working on a main track. The foreman may want the order to run from 6:00am to 5:00pm; but, in all likelihood the train dispatcher will have the order read from 0601 to 1701, not 0600 to 1700 as the foreman requested.
Years ago in the train order and timetable days, a train dispatcher might put out a train order reading something like this:
"Extra 643 West has right over all trains and waits at Able until 1201 Baker until 1301 and Charlie until 1501" (never "1200," "1300," and "1500").
It seems that 1-minute after the hour was standard practice, 59-minutes after the hour and anything in between was okay as well, but expressing a time at the top of the hour was strictly VERBOTEN! Why do you suppose that is (or was)?
The only top of the hour aversion that I can remember on a consistent basis was to noon and midnight, probably because of the AM/PM difference.
I remember yard jobs being dispatched at 11:55 yard office or 7:55 hump job. Always 5 min before the hour.
She who has no signature! cinscocom-tmw
The last I remember, ever since the railroads adopted the 24-hour time format (aka: Military Time), operating personnel were permitted full use of the clock.
0000 is midnite.1200 is noon.My understanding is that while the above-listed times were legally acceptable, it was still suggested by management to avoid those two moments for safety's sake.
Times, of course, may have changed since my day.(The above sentence is, of course, pun intended)
Our Form B times usually use the even number, top of the hour, when that is the start/end time. Example 0700, 0800, 1900 etc. The only hour I haven't seen is for midnight. There have been some B bulletins (usually derailments, etc) where a B will be in effect until 2359 and the next day's B starts at 0001.
Is midnight 0000 hrs or 2400 hrs? I have a watch that inaddition to the hours 1 thru 12 in black has 13 thru 24 in red at the appropriate locations on the dial. Maybe to avoid that confusion, the B's around midnight use 2359 and 0001.
I checked a copy of the first edition of GCOR, the last to have rules for train orders. It authorizes the use of continental time. I didn't see the rule prohibiting the use of even hours for train orders, but the examples in the forms of orders used 201 instead of 200, 801 instead of 800, etc.
Even though even hours were prohibited in train orders, I have line-ups where they were used for the estimated times of trains. Such as 10AM, 12PM, 4PM etc. The times for the line-ups being in effect used 701am instead of 700am or 7am, etc.
Jeff
I don't believe all roads use the 24 hour clock...
And I think the use of the minute instead of the whole hour has been in use to avoid any confusion as to the time. I think operators and dispatachers feel they themselves could be confused so err on the side of safety by going a minute after. The most confusing two hours of the day are 12 Noon and 12 Midnight. In effect there really isn't a 12 PM nor 12AM but rather noon and midnight with the minute after being the safest and least confusing way of dealing with it.
RIDEWITHMEHENRY is the name for our almost monthly day of riding trains and transit in either the NYCity or Philadelphia areas including all commuter lines, Amtrak, subways, light rail and trolleys, bus and ferries when warranted. No fees, just let us know you want to join the ride and pay your fares. Ask to be on our email list or find us on FB as RIDEWITHMEHENRY (all caps) to get descriptions of each outing.
Mookie I remember yard jobs being dispatched at 11:55 yard office or 7:55 hump job. Always 5 min before the hour.
Dan
The two USA rulebooks that I have, Southern of 1943, and RI in the early fifties, both state that even hours are not to be used in writing train orders. There is no reason given.
Incidentally, 12:00 am is properly twelve hours before Meridian (when the sun is at its highest point) or midnight, and 12:00 pm is properly twelve hours after Meridian, or midnight. Noon could well be expressed as 12:00 m--and time was when it was so expressed.
When it became customary to use lightface to indicate morning and bold face to indicate afternoon, the custom was to change from one to the other at 1:00, and not at 12:00. Now, when the distinction is shown, 12:01 is one minute past noon, and 12:01 is one minute past midnight.
Of course, the twenty-four hour system leaves no doubt as to whether the time is before noon or after noon, but it is confusing to people who have grown up with am and pm, and many have trouble converting the after noon times to pm times.
Johnny
jeffhergert Is midnight 0000 hrs or 2400 hrs? I have a watch that inaddition to the hours 1 thru 12 in black has 13 thru 24 in red at the appropriate locations on the dial. Maybe to avoid that confusion, the B's around midnight use 2359 and 0001.
To muddy this situation. One company I worked for had 2 different computer systems. Some applications would only recognized 2400 and others only 0000 and other applications both. So when they talked to each other they would transfer either number depending on the application. So we then never used either number after that. Unfortunately some subtraction or additions would come up 2400 or 0000. Computer geeks claimed it would cost too much to change. (took over 2 yrs). Boy did they take a ribbing evey time we saw one of the geeks. The lame jokes really came out such as "is the time fat or lean".
Even Trains Forums..................----------
The old standard code of Operating Rules, on which almost every railroad based its own rule books, had a provision which appears as part of Rule 206 in the L&N's Rules of the Operating Department: "Even hours as '10:00 AM' must not be used in stating time in train orders." Other than in train orders, even hours were used on the railroad as much as elsewhere. Shifts more often than not began on an even hour. Public timetables and even employee timetables would show even hours, except for 12:00 midnight and 12:00 noon, where AM or PM would not be appropriate. I'm looking at a Tennessee Central Employees' Timetable which shows No. 81 leaving its initial station at 3:00 PM.
Carl
Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)
CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)
henry6 I don't believe all roads use the 24 hour clock... And I think the use of the minute instead of the whole hour has been in use to avoid any confusion as to the time. I think operators and dispatachers feel they themselves could be confused so err on the side of safety by going a minute after. The most confusing two hours of the day are 12 Noon and 12 Midnight. In effect there really isn't a 12 PM nor 12AM but rather noon and midnight with the minute after being the safest and least confusing way of dealing with it.
Never too old to have a happy childhood!
We do the minute before the hour/ half hour here on the PTRA, but the reason is simple.
By starting jobs at 1 minute before, you fit three 8 hour shifts in a standard 24 hour "day".
So we start jobs at 06:29, 14:29 and 11:59..
Some jobs start at 08:29, or 08:59, so forth and so on, but by starting at 1 minute before the hour or half hour, no job will hit the hours of service on the absolute beginning of following 24 hour "day"
Lets say we started a job at 12 noon, or 1200 hours, and they hog out, then they hog out on the following 24 hour clock.
But if they start at 11:59, and work the full 12 hours, they reach the hours of service and still tie up on the same 24 hour "day".
Keeps the rest hours and hours of service stuff a lot more simple.
Under the hours of service, you can work 2 eight hour shifts in a 24 hour day.
If you started at 12 midnight, worked 8, were off 8, the worked the next 8, you could argue you exceed the two 8 hour shift because you worked into the following 24 hour day.
Is 0000 the beginning of a new "day", or the end of the last day?
By starting a minute before midnight, you work from one 24 hour day into the next, then have 8 off, then start you 2nd shift just before the next 24 hour day starts.
This way, the second 8 hour shift is a double, (paid at time and a half).
If you started straight up at the hour, the carrier could argue you were only working one 8 hour shift in a 24 hour day, because your next shift would be starting on the following 24 hour clock "day".
Look at it like this..
If the "day" starts at 0000....
I started at midnight (0000 hours) on the 1st, worked 8 hours, to 8 am...rested till 4 pm and worked the next 8 hour shift...when I tie up, I am tying up in/on the next 24 hour day, at midnight on the 2nd.
Did I work two 8 hour shifts in the same day, or did I work one 8 hour **** on day, and one on the following day?
Did I start on the 1st and end on the 1st or did I start on the 1st, and end on the 2nd?
So, to eliminate any confusion, we always start 1 minute before the hour or the half hour, simplifying the time keeping.
23 17 46 11
Thanks, everyone, for your input. It all makes a lot more sense now.
As for this evening, between March 13th @ 1800 and March 14th @ 0600, the start of the new day happened at either of these two times:
March 13th @ 2400 or March 14th @ 0000.
For all intents and purposes, both times are exactly the same.
Bob-Fryml Thanks, everyone, for your input. It all makes a lot more sense now. As for this evening, between March 13th @ 1800 and March 14th @ 0600, the start of the new day happened at either of these two times: March 13th @ 2400 or March 14th @ 0000. For all intents and purposes, both times are exactly the same.
You go from 23:59:59 to 00:00:00 on the new day.
Okay, I still don't understand why even numbered times cannot be used on train orders.
aegrotatio Okay, I still don't understand why even numbered times cannot be used on train orders.
Ed...
You just violated the Railway Security Improvement Act. You need 10 hours undisturbed rest following your shift. Now I have to report you to the FRA!
On to the question at hand...
The majority of our regular assigned jobs either sign up on the hour or half hour, excepting midnight. Any job nominally signing up at midnight either signs up at 2359 or 0001. Any planned work authorities are also effective and canceled on the hour or half hour, again excepting midnight.
Our computers will not allow you to tie up a ticket at 2400/0000 either.
Nick
Take a Ride on the Reading with the: Reading Company Technical & Historical Society http://www.readingrailroad.org/
BaltACD Bob-Fryml Thanks, everyone, for your input. It all makes a lot more sense now. As for this evening, between March 13th @ 1800 and March 14th @ 0600, the start of the new day happened at either of these two times: March 13th @ 2400 or March 14th @ 0000. For all intents and purposes, both times are exactly the same. Check your computer clock....there is not 2400..... You go from 23:59:59 to 00:00:00 on the new day.
Yes, I have seen a number of digital clocks that display "23:59:59" and then one second later display "00:00:00," but I've also worked with computer systems that will accept, for example, 03/15 @ 2400 or 03/16 @ 0000 as equivalent time values.
Having spent 33+ years in the U S Army, I am very comfortable with the 24-hour clock. I still can't figure our 'civilian' dates. I have a coupon in front of me that expires 7/5/2010. When is that? Is it 07 May 2010 or 05 July 2010? Pret' stupid, methinks.
VIA Rail Canada uses the 24-hour clock for their TTs. It works. I wish Amtrak (and all of the United States) would do the same. On my BNSF, we use the 24-hour clock. Times between 2400 and 0059 are expressed as "Midnight 29" and Zero-zero-two nine, as an example. 0001 hours is "Midnight zero one", and zero-zero-zero-one. This does avoid confusion. Both expressions are used in issuance of orders and read back, not one-or-the-other. BNSF also uses International Phonetics (per ETT rules) for letters (Alfa, Bravo, Charlie, Delta, Echo...). Unfortunately, most DSs don't comply with this rule, requiring many repeats (time wasters), especially when they confirm orders with their initials. We had one DS in Fort Worth (I think he moved to Los Angeles) who would initial his orders T-D-V - "Train Delayer Valdez". He got his point across, but, I think Tango Delta Victor would have been better. Maybe he wanted to get sent to Los Angeles. Always remember, "zero" is a cypher, "O" is a letter. Don't mix them up!
Hays -- Whiskey Delta Hotel, except in "Oh!, Canada!", where it is Whisky.
Our community is FREE to join. To participate you must either login or register for an account.