This is a dynamic display case. The locomotive will not go anywhere.
OldSchoolScratchbuilder The right side of the display case will be extended (wood base only) so the locomotive can be driven out of the case through an arched tunnel facade made on the right stained glass side.
The right side of the display case will be extended (wood base only) so the locomotive can be driven out of the case through an arched tunnel facade made on the right stained glass side.
Rich
Alton Junction
Attaching objects to the glass will not be a problem using E6000 adhesive. I have tested it with sandstone, gypsum, wood, glass and metal and the bond strengths are excellent.
The right side of the display case will be extended (wood base only) so the locomotive can be driven out of the case through an arched tunnel facade made on the right stained glass side. There will be a wooden compartment behind the fusing glass sky (this is not the sky piece I am using - the other half will be carefully transported to the glass shop tomorrow) for electrical components (custom circuit boards, LED lighting, connectors, etc). The track will pass by a real (miniature) Cheverie, Nova Scotia gypsum exposure and reindeer lichen collected in Walton, Nova Scotia at an abandoned gypsum quarry this past spring. The lichen was boiled in water, isopropyl and green dye many months ago and still looks great!
Using Douglas fir for the base and will run the track 5-degrees from the plane of the vertical backdrop glass. Hence, the HO-scale diorama objects will have to emerge from the glass at the same angle. This includes trees, power poles, power lines, signage etc.
Have to take into account glass flattening in the kiln but the trail separation near the aircraft should be evident. The trail is high enough in the sky not to interfere with the railside power poles, which will actually exit the glass at a shallow angle onto a real HO-scale pole running along the roadbed with catenary cables carrying a DCC signal down the pole and onto the track so the train's lights and sounds will function. A hole on the case side will run the connectors to the DCC drivers.
Glad I'm not the only one thinking stained glass belongs elsewhere.........
The locomotive (or whatever piece of MR equipment) is the star, and the stage should be the backdrop, with attention focused on the item displayed.
ENJOY !
Mobilman44
Living in southeast Texas, formerly modeling the "postwar" Santa Fe and Illinois Central
tstage I really enjoy stained glass but...seems like an odd medium for displaying - especially if it's a favorite locomotive. Unless done very subtley, the former would overpower the latter - at least to me. Tom
I really enjoy stained glass but...seems like an odd medium for displaying - especially if it's a favorite locomotive. Unless done very subtley, the former would overpower the latter - at least to me.
Tom
Personally I think plain is better. Anything funky and attention getting distracts the eye from the star of the show in the display - the engine!
I feel the same way about fascia's - it is a frame that should compliment and not distract the eye.
I don't care for it. Save the artwork for the wall.
Rio Grande. The Action Road - Focus 1977-1983
The longest locomotive that I would put in this particular display case is this one, so I'll use it to measure the backdrop's vertical dimension. In order to place a contrail in the sky, a 6" x 12" piece will do nicely. Oh yeah, I'll make it look like a plane instead of a rocket :).
Bought my fusing glass background for the sky, stringers for tree branches, and frit for colourful autumn leaves. Today I will cut the glass to size keeping the section I like for the sky. Will lay out the background (trees etc) in the glass store's workshop on Saturday. Then the piece will be fired in the kiln and I will pick it up Monday.
The sky and colourful trees from my backyard are the inspiration for my display case backdrop.
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
All good advice, thank you. I have a great spot for working with glass at home. Also, the store has class night where we can use all of the equipment (grinders, foilers, soldering irons, etc), an expert is available to help out and we can use the kiln for firing fusing glass. I plan to use fusing glass at the back of the display case with a railroad scene that fits the locomotive or freight car. The rest of the glass will be chosen to match company colours and/or for lighting effects. Starting my first case at the store on Saturday.
Sounds like a very creative plan.
I have done a little bit of stained glass work and I enjoyed it thoroughly. The only trouble I had was when I tried to cut the glass in a cold garage in the middle of the winter. Glass does not like to be cut when it is cold!
The only suggestion that I would make is that you don't make the stained glass/wood display case so fancy that it detracts from the main object which is the locomotive. Less might be more.
Have fun! Watch out for sharp edges!
Dave
I'm just a dude with a bad back having a lot of fun with model trains, and finally building a layout!
Finished my course on stained glass and am starting to make lots of nice pieces of art in my GypsumWorks Studio. I am getting ready to make my first stained-glass/wood/stone display case for one of my favourite HO DCC locomotives that will not be used on my model railroad. I'll post pics of my progress in this thread.