Edit post

Edit your reply below.

Post Body
Enter your post below.
I have a couple of points. Do you really need a compressor? Usually the smaller (more inexpensive) models have very small or no holding tanks, so you may get "pulsing" from the action of the compressor. Why not use a air tank. You can pick-up a good one at any auto parts store. Just run down to the gas station, and pump-it-up. One tank fill will paint dozens of models. I use a compressor, only because I have a professional unit for automotive work in the garage. I would recommend the Testors "Aztec" line of airbrush. You can get a single action, or dual action for less than $50.00. In case you're not familiar with the terms, "single action" means the trigger only moves up and down. The farther the trigger is depressed, more air/paint is released, but the air/paint mixture is constant. Sometimes when trying to get into small spaces, like engine ladder steps, without a fine touch on the trigger, you'll glob paint in the corners. "Dual action" means the trigger goes up and down, but also forwards and back. The more the trigger is depressed, more air comes out. The farther the trigger is pulled-back, the more paint is released. So you can see the dual action is prefered by most. You can get the Testors equipment at most Wal-Marts, also. (look in the plastic car kits section) MOPAC 1
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag

Update Reply

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Model Railroader Newsletter See all

Sign up for our FREE e-newsletter and get model railroad news in your inbox!

Subscriber & Member Login

Edit post

Post Body

Tags (Optional)

Subscriber & Member Login

Users Online

Search the Community