Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
General Discussion (Model Railroader)
»
Beginner has questions?
Beginner has questions?
469 views
5 replies
Order Ascending
Order Descending
Anonymous
Member since
April 2003
305,205 posts
Beginner has questions?
Posted by
Anonymous
on Saturday, October 8, 2005 8:32 AM
Hi all .... I'm just getting started in HO gauge layouts. I started with a Bachman Old Tyme Village Passenger kit which included E-Z track. I didn't use the E-Z track - I bought some standard nickel-silver track and cork roadbed. My question is this: can the inexpensive engine be so light that it doesn't track reliably? Of course I've learned everything the hard way (:<))
I've checked the ballast, cleaned the tracks, etc. and even removed the front wheels of the engine. I noticed that the front wheels weren't heavy enough to track reliably.
Thanks for you comments,
Dean Dameworth
Hartsville, SC
Reply
Edit
Train 284
Member since
May 2004
From: Redding, California
1,428 posts
Posted by
Train 284
on Saturday, October 8, 2005 9:32 AM
First of all welcome to the forum! [#welcome] Glad to have you aboard!
Anyways, like Dave said, check the wheel gauge. That would be the first place to check.
The wheels on the truck could be to tight or to loose. If you can, try to get a NMRA wheel gauge. Just a thought.
Don't be afraid to ask any question around here, no matter how stupid you think it is. Everyone is always willing to help!
Matt
Espee Forever! Modeling the Modoc Northern Railroad in HO scale Brakeman/Conductor/Fireman on the Yreka Western Railroad Member of Rouge Valley Model RR Club
Reply
ARTHILL
Member since
March 2005
From: New Brighton, MN
4,393 posts
Posted by
ARTHILL
on Saturday, October 8, 2005 9:36 AM
Welcome to the hobby. I don't have that engine, but I have never found an engine too light to run at all. Some won't pull much. There are a lot of connections where a little dirt can cause a break in current. Have you cleaned the tires on the engine, specially the flanges? Does the engine run on low voltage when it is off the track and you apply power directly to the wheels. Sometimes things get sticking inside and just stall out. Are all the interior wire connections solid? Good luck, Hope to hear from you again soon.
If you think you have it right, your standards are too low. my photos
http://s12.photobucket.com/albums/a235/ARTHILL/
Art
Reply
loathar
Member since
August 2004
From: Amish country Tenn.
10,027 posts
Posted by
loathar
on Saturday, October 8, 2005 11:36 AM
I had a cheap loco with pilot wheels where too light. Glueing a fishing sinker on it helped the problem.Some locos have springs mounted on the pilot to help pu***hem down on the track. Check your wheel gauge and check for binding as stated above.[#welcome]
Reply
selector
Member since
February 2005
From: Vancouver Island, BC
23,330 posts
Posted by
selector
on Saturday, October 8, 2005 1:15 PM
Run a finger in the area where the truck is meant to pivot to see if there is anything that might be acting as a burr or an obstacle. I take it that it pivots freely, without jerking or binding when under load or hanging freely? It is lubricated? If its retaining screw and washer are overtight, they may prevent it from either pivoting or rocking to accommodate irregularities and curves. Does it swing in equal arcs of at least 20 degrees on either side of dead centre?
My first step would also be to check gauge and to spring or weight the truck.
Good luck. Once you find the solution, would you consider reporting your findings here for the benefit of others?
Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up