Edit post

Edit your reply below.

Post Body
Enter your post below.
Trevor, Your layout is so dirt simple, why not add some blocks so in the future, you won't have to pull tracks apart to install insulated joints. I would do it at the diversion end of every turn out. That way if you want, you can put some block switches in the wires so you can isolate a loco or train on a siding or spur. Also, your layout is small enough that 20-22 gauge wire is all you need. In the future, you can be helpful for yourself and the people trying to help you, if you are a bit more descriptive and thorough with your questions. I.e. I'm building a 4 X 8, not thinking about cab control, only simple wiring. In fact, if you are not going to have any blocks, you only need to wire directly to the positive and negative rails of your tracks! Two wires from the power pack to the rails. For simplicity's sake, this will suffice, especially if you are going to solder the rail joints. This method makes it more difficult to make changes and additions and subtractions, but may be all you need. I hope I have been helpful!
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag

Update Reply

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Model Railroader Newsletter See all

Sign up for our FREE e-newsletter and get model railroad news in your inbox!