Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
General Discussion (Model Railroader)
»
Cleaning Brass Parts
Cleaning Brass Parts
910 views
4 replies
Order Ascending
Order Descending
gtcr98
Member since
May 2003
From: US
24 posts
Cleaning Brass Parts
Posted by
gtcr98
on Friday, May 13, 2005 8:48 AM
I'm would like to know what is the best method of cleaning brass parts prior to painting. In particular, I have some Smokey Valley stancions that need cleaning. Soap and water removes the mold release agent but not the tarnish. Any suggestions would be greatly appreciated.
Gary Taylor
Reply
ndbprr
Member since
September 2002
7,486 posts
Posted by
ndbprr
on Friday, May 13, 2005 12:02 PM
There really isn't any reason to remove the tarnish. You could do more harm then good by doing so. Tarnish is an oxide of the metal and very well adhered (atomically) to the base metal. Removal may leave pits or other surface impefections. I would use vinegar to remove any oils on the parts and then rinse in distilled or soft water and allow to dry on a paper towell. try not to handle them with bare hands after that until they are painted and they should be fne.
Reply
selector
Member since
February 2005
From: Vancouver Island, BC
23,330 posts
Posted by
selector
on Friday, May 13, 2005 12:09 PM
I would try either acetone, if you suspected that any oils were still on the paint, or plain old tri-sodium phosphate (TSP). Both are excellent pre-paint treatments. Whatever you do end up using, try it in an inconspicuous place and use lots of light to determine if there is an unwanted outcome.
Reply
areibel
Member since
March 2002
From: NW PA
303 posts
Posted by
areibel
on Friday, May 13, 2005 2:25 PM
I'd go with Selector, try some TSP in hot water. Get a small plastic container, mix it up and plunk in the parts. If you use something like a small tupperware container, then you an agitate it a bit to speed it along.
Cambridge Springs- Halfway from New York to Chicago on the Erie Lackawanna!
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, May 13, 2005 8:11 PM
One of the best degreasers I know of is dishwashing liquid. A good rinse in luke warm distilled water afterwards should remove any residual from the sudsing agents. Some Q-tips (cotton swabs) for around detail (cleaning and drying), then "don't touch" with human hands 'til primer. Good luck.
Reply
Edit
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up