Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Best Cement for Unknown Plastic Type

2832 views
14 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2002
  • From: Findlay, Ohio
  • 447 posts
Best Cement for Unknown Plastic Type
Posted by danmerkel on Sunday, February 25, 2024 4:53 PM

I bought some half inch plastic leters to make a sign on the roof of a building similar to the way some old newspapers had signe on their guildings' roofs. The letters aren't polystyrene but I don't know what they are. I plan to put them on some Evergreen Styrene strips then mount them. Any idea what type of cement might work best in this kind of application?

I note that Locktite makes a combo etchant & CA pack. I also see that Plasttuct(?) has three different types of liquid cement for plastics but I don't have any experience with them.

I'm looking for suggestions; thank you in advance.

dlm

  • Member since
    September 2004
  • From: Dearborn Station
  • 24,281 posts
Posted by richhotrain on Sunday, February 25, 2024 6:27 PM

Plastruct in the bottle with the orange label. Works like a charm in such situations.

Rich

Alton Junction

  • Member since
    August 2003
  • From: Collinwood, Ohio, USA
  • 16,367 posts
Posted by gmpullman on Sunday, February 25, 2024 6:36 PM

richhotrain
Plastruct in the bottle with the orange label.

Second vote for the Plastiweld. I buy mine from Hobbylinc:

https://www.hobbylinc.com/plastruct-plastiweld-1-plastic-model-cement-00002

The letters are probably ABS which is what some Plastruct shapes are made of. I keep a bottle of Bondene around, too.

https://www.hobbylinc.com/plastruct-bondene-cement-plastic-model-cement-00003

What exactly is the difference? I have no idea. Anyone?

From a model car site:

Plastic Weld is MEK-based (methyl ethyl ketone) and is a more universal solvent, a little "hotter", than Bondene (dichloromethane based).

Bondene sets quicker and is used more for bonding styrene to styrene, ABS to ABS, etc.

From Plastruct: (scroll down)

https://plastruct.myshopify.com/pages/technical-info-msds-sheets

Good Luck, Ed

  • Member since
    December 2004
  • From: Bedford, MA, USA
  • 21,481 posts
Posted by MisterBeasley on Sunday, February 25, 2024 6:45 PM

You could try Aileen's Tacky Glue.  It is a simple adhesive that does not really bond, but it holds very well.  It won't hold a lot of weight, but for something light like letters or figures it's terrific.  I use it for my little people because it will hold them securely but with a bit of a nudge they come off with no damage, no lost little feet.

It takes an iron man to play with a toy iron horse. 

  • Member since
    February 2008
  • 8,849 posts
Posted by maxman on Sunday, February 25, 2024 8:28 PM

Canopy glue.

  • Member since
    September 2004
  • From: Dearborn Station
  • 24,281 posts
Posted by richhotrain on Sunday, February 25, 2024 11:27 PM

gmpullman
 
 
richhotrain
Plastruct in the bottle with the orange label. 

Second vote for the Plastiweld. I buy mine from Hobbylinc:

https://www.hobbylinc.com/plastruct-plastiweld-1-plastic-model-cement-00002

The letters are probably ABS which is what some Plastruct shapes are made of. I keep a bottle of Bondene around, too.

https://www.hobbylinc.com/plastruct-bondene-cement-plastic-model-cement-00003

What exactly is the difference? I have no idea. Anyone?

Ed has already provided links to the pertinent areas of the Plastruct website, but here is the Description that Plastruct provides for each of those two adhesives:

PLASTIC WELD SOLVENT CEMENT

The leading general purpose solvent cement for fast, permanent bonding of most dissimilar plastics. Immediately tacky. Sets in minutes. Permanently bonds ABS to Butyrate, ABS to Styrene, ABS to Acrylic and more. Actually dissolves a thin film of the surfaces to be joined, creating a bond as strong as the surrounding areas. Also works as a liquid filler. Full coverage attained by capillary action. Comes with applicator brush in cap.   

BONDENE SOLVENT CEMENT

A specially formulated solvent cement for fast, permanent bonding of most similar plastics, including Styrene. Quickly bonds ABS to ABS, Styrene to Styrene, Butyrate to Butyrate and Acrylic to Acrylic. Actually melts the surfaces together, creating a bond as strong as the surrounding areas. Full coverage attained by capillary action. Comes with applicator brush in cap.

Rich

Alton Junction

  • Member since
    November 2002
  • From: Findlay, Ohio
  • 447 posts
Posted by danmerkel on Saturday, March 9, 2024 10:45 AM

I've tried all but the Tacky Glue with NO real success. I bought the Locktite product and it didn't work either. I guess Tacky Glue is next but I can't believe that somewhere out there, there isn't a glue specific to this plastic.

dlm

  • Member since
    July 2006
  • From: 4610 Metre's North of the Fortyninth on the left coast of Canada
  • 9,352 posts
Posted by BATMAN on Saturday, March 9, 2024 11:40 AM

Rubber Cement or caulk. You can peel it off if it doesn't hold.

 

Brent

"All of the world's problems are the result of the difference between how we think and how the world works."

  • Member since
    December 2004
  • From: Pa.
  • 3,361 posts
Posted by DigitalGriffin on Sunday, March 10, 2024 5:16 AM

Glues with MEK (Methyl Ethyl Keytone) aren't going to do the job.  They are meant for polystyrene really.   While they work with other plastics, it doesn't work as well.  And to be honest I'm moving away from MEK as joints brittle with time. (Breaks easier when handled.)

CA will bond just about anything.  But if you are worried, just go over the bonding surface once or twice with 60 grit sand paper and then wash it off.  It's possible your plastic letters are covered in some sort of release agent to make them easy to remove from the mold.  Letting them soak in soapy water may help.

Don - Specializing in layout DC->DCC conversions

Modeling C&O transition era and steel industries There's Nothing Like Big Steam!

  • Member since
    February 2017
  • From: Harrisburg, PA
  • 659 posts
Posted by hbgatsf on Sunday, March 10, 2024 8:40 PM

Did you buy exactly what you need or do you have extras?  If you only have what you need be careful of melting the letters with the hot solvents.  

Another idea along the lines of rubber/contact cement is Walthers Goo.  

Rick

  • Member since
    November 2002
  • From: Findlay, Ohio
  • 447 posts
Posted by danmerkel on Monday, March 11, 2024 10:53 AM

hbgatsf
...do you have extras?

I have plenty. The letters I bought came in two sets per package with many and multiple duplicates. 

dlm

  • Member since
    June 2022
  • 96 posts
Posted by IC_Tom on Monday, March 11, 2024 10:56 AM

I like Wilhold, which is very similar to the canopy glue mentioned earlier.  Dries absolutely clear on plastic and the joint can be broken almost all of the time (in case of mistakes, etc.) without breaking the plastic. 

  • Member since
    November 2002
  • From: Findlay, Ohio
  • 447 posts
Posted by danmerkel on Saturday, March 16, 2024 11:02 AM

OKAY, good news! I purchased and tried the Locktite special cement for plastics and it worked pretty well. There are two parts; one appears to be some kind of etchant and the other is more like a traditional CA. The etchant is applied with a tip that looks like a Magic Marker, you wait a minute or so then use the liquid cement. The letters have been in place for about an hour. I picked at them a little and they are stil where I put them.

I'm told that this also works with delrin plastic but I've not tried that yet.

Since I have plenty of extra letters, I may add a few to a blank piece of plastic then test the bond. But for now, the Locktite product seems to work pretty well. :)

dlm

  • Member since
    September 2004
  • From: Dearborn Station
  • 24,281 posts
Posted by richhotrain on Saturday, March 16, 2024 2:26 PM

Loctite makes lots of products with similar names. Are you referring to Loctite Plastics Bonding System?

Rich

Alton Junction

  • Member since
    November 2002
  • From: Findlay, Ohio
  • 447 posts
Posted by danmerkel on Thursday, March 28, 2024 5:46 PM

richhotrain
Are you referring to Loctite Plastics Bonding System?

Yes. The first time I tried it, I must have done something wrong because the results weren't good. Second time's a charm I guess. :)

dlm

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!