Edit post

Edit your reply below.

Post Body
Enter your post below.
Hello cbroyles, I don't see a great potential for trouble by isolating track sections between feeders, but it's really not necessary. I have yet to see it recommended by a DCC manufacturer. One of the benefits of DCC is not having to cut gaps or add insulated rail joiners as is necessary for DC cab control. The exceptions are if you're wiring the layout for power districts or wiring a progamming track on the layout. A power district has DCC command station powering an electrically isolated section of the layout. In this case, both rails would be insulated or gapped between power districts. Don't confuse this with DC cab control wiring. Power districts are used for power distribution, not train control, and almost always on larger layouts with DCC where one command station can't handle the amperage demands of several trains. Most of us need only one DCC command station for the entire layout. Manufacturers cover programming tracks in their literature. As for feeders I solder them every six feet or so. I attach the other ends to a barrier/terminal strip (either four-, six-, or eight-position dual row, depending on the number of parallel tracks in the area). There's one barrier/terminal strip under the layout every six or so feet for the "north" rail and another for the "south" rail, with one track feeder per terminal position. Barrier/terminal strips keep the wiring neater, and if there's an open or a short circuit in the track I can unscrew feeders to isolate the problem area more easily than by unsoldering or clipping connections. Make sure to use color-coded feeders. I prefer red and black. As for wiring from the bus line to the barrier/terminal strips, I attach a jumper strip to one row of terminals on each barrier/terminal strip opposite from the track feeders. Then to this side I attach a short feeder from the appropriate bus line of the same wire gauge. I'm using 14-gauge solid strand and make the connection from the bus line using insulation displacement connectors (sometimes called "tap splices.") On the other end of the bus feeder I crimp on a ring terminal. Bottom line: it's nice and tidy, and easy to maintain. Hope this helps, Paul Schmidt Contributing Editor Trains.com
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag

Update Reply

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Model Railroader Newsletter See all

Sign up for our FREE e-newsletter and get model railroad news in your inbox!

Subscriber & Member Login

Edit post

Post Body

Tags (Optional)

Subscriber & Member Login

Users Online

Search the Community