Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Central Valley Model Works new Flat Car

2558 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2011
  • From: Northern Minnesota
  • 2,774 posts
Central Valley Model Works new Flat Car
Posted by NP2626 on Tuesday, April 16, 2013 5:05 PM

Central Valley Model Works has released a new HO Scale Flat Car kit.  It is a model of a Northern Pacific 41 foot flat car.  These flat cars were built by Northern Pacific and will fit eras from the 1930s to the 1970s.  Suggested retail is $12.95 for two kits.  Not included are trucks and couplers.  However the kit is very complete with all the detail parts needed, plus shaped wire grab irons.  There really is no room and no place to install the weight needed to bring the car to NMRA RP 20.1 and Central Valley recommends that the loads be the weight needed to give the car its' desired weight.

I found the car to be fun to build.  There are 6 stake pockets per side that are very small and easy to loose, so care must be taken when cutting these from the sprues.  The side beams are deep and there are gussets that get glued to the underside between the car floor and this "skirt" as CVMW calls them.  The car comes in black and the molded details include all brake lines, rods and plumbing.  I found the detailing to be as crisp and clean as my Branchline Blue Print and other highly detailed kits are.  They are a very nice addition to my Northern Pacific layout and stand up to very close scrutiny.  I think the price is right, buying cars without trucks; or, couplers makes sense to me as I always use Kadee #5s and replace all plastic wheels with metal so buying a set of trucks was just fine with me.

If you enjoy building kits as much as I do and like a challenging car to build, these are a good choice!  I'm sure these cars were seen on lines from coast to coast and from the southern boarders to the northern and not just on Northern Pacific!    

NP 2626 "Northern Pacific, really terrific"

Northern Pacific Railway Historical Association:  http://www.nprha.org/

  • Member since
    June 2006
  • From: Baltimore, MD
  • 1,726 posts
Posted by CSX_road_slug on Tuesday, April 16, 2013 8:30 PM

Looks like a great little car for the money, I need a flatcar to couple with my Walthers American MOW crane and that would do quite nicely!

Here's a link to the kit: http://www.shop.cvmw.com/NP-Built-Flat-Car-Kit-1003.htm

-Ken in Maryland  (B&O modeler, former CSX modeler)

  • Member since
    August 2011
  • From: A Comfy Cave, New Zealand
  • 6,244 posts
Posted by "JaBear" on Wednesday, April 17, 2013 3:49 AM

Gidday, looks good.

Slightly Off Topic .  NP2626 have you considered posting your list of freight car kits as a "stand alone" reference thread ??

Cheers, the Bear.

"One difference between pessimists and optimists is that while pessimists are more often right, optimists have far more fun."

  • Member since
    December 2011
  • From: Northern Minnesota
  • 2,774 posts
Posted by NP2626 on Wednesday, April 17, 2013 9:22 PM

"JaBear"

Gidday, looks good.

Slightly Off Topic .  NP2626 have you considered posting your list of freight car kits as a "stand alone" reference thread ??

Cheers, the Bear.

The list has been posted here a couple times.  If your talking about doing something else with it, explain what you mean.  I'm not computer illiterate; but am dang close, so go easy.

NP 2626 "Northern Pacific, really terrific"

Northern Pacific Railway Historical Association:  http://www.nprha.org/

  • Member since
    August 2011
  • From: A Comfy Cave, New Zealand
  • 6,244 posts
Posted by "JaBear" on Thursday, April 18, 2013 2:30 AM

NP2626

 I'm not computer illiterate; but am dang close, so go easy.

Gidday NP2626, You and me both.

I was being lazy but have managed to find your post with the list , not only that, but have managed to print it off and also put it into my favourites, a first !!!!!

"One small step for man but one giant step for a Bear." Laugh

Cheers, the Bear

"One difference between pessimists and optimists is that while pessimists are more often right, optimists have far more fun."

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!