BDL168 with AR1 wiring

[Scouser]

Does anyone have a clear wiring diagram for connecting the AR1 with a BDL168 for detection in the reversing loop? I only need the one detection section in the loop.

I'm using zone 4 for the reverse section but I'm a little confused on where to connect it all, and hep would be appreciated.

[rrinker]

 Each group of 4 detection sections on the BDL168 is a zone. An autoreverser has to go on the input side of the BDL168. That means all 4 outputs in that zone are part of the reverse section, even if you only need 1, you cannot use the others for anything outside the reverse loop.

http://www.digitrax.com/tsd/KB51/bdl168-using-in-a-reversing-loop/

second picture, the red and black wires on the left come from the output of the AR1.

                                              --Randy

 

[Scouser]

Thanks Randy, I have that but unfortunately it's not clear which connections are correct on the AR1 side. There are 4 connections on the AR1 and although I think I have it correct, the block always shows as occupied which makes me think I have it wrong

[Scouser]

I figured it out