Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
Prototype information for the modeler
»
Turntables
Turntables
4692 views
12 replies
Order Ascending
Order Descending
nfmisso
Member since
December 2001
From: San Jose, California
3,154 posts
Posted by
nfmisso
on Tuesday, December 23, 2003 4:28 PM
In MR, during the past couple of years, there was an article on building a turntable on top of the Atlas TT. Basically, just mount a shaft to the Atlas that comes up to the center of your pit. Then build whatever on top.
Nigel N&W in HO scale, 1950 - 1955 (..and some a bit newer too) Now in San Jose, California
Reply
jrbarney
Member since
January 2002
1,132 posts
Posted by
jrbarney
on Tuesday, December 23, 2003 12:56 PM
Ron,
Yet another book useful for modeling the USMRR era is "
A Picture History of U. S. Transportation, On Rails, Roads and Rivers
," Roderick Craib, 1958, Simmons-Boardman Publishing Corporation. Chapter 4,
Transport and the war
, is especially pertinent. However, there are photos in other chapters whose caption dates place them in the same era. Given the copyright date, you'll either have to borrow this via Inter Library Loan or look for a copy at the various used book sources, online and off. Hope this helps.
Bob
"Time flies like an arrow - fruit flies like a banana." "In wine there is wisdom. In beer there is strength. In water there is bacteria." --German proverb
Reply
jrbarney
Member since
January 2002
1,132 posts
Posted by
jrbarney
on Monday, December 15, 2003 8:53 AM
Ron,
I forgot to include "
Civil War Railroads
," by George B. Abdill, 1961, Superior Publishing Company. There is a later edition, but the gamma of the photos isn't as good as in the first edition, in my opinion, and there appears to be some minor cropping of some photos. There are various turntable scenes that should help you with details of the pit, etc.
Bob
"Time flies like an arrow - fruit flies like a banana." "In wine there is wisdom. In beer there is strength. In water there is bacteria." --German proverb
Reply
jrbarney
Member since
January 2002
1,132 posts
Posted by
jrbarney
on Saturday, December 13, 2003 9:33 AM
Ron,
As an afterthought, there are two books you may want to read if you are not already aware of them. One is "
Civil War Railroads & Models
," Edwin P. Alexander, 1977, Crown Publishers. On page 56 there is a photo, and on page 57, a partial plan, of the turntable at Manassas Junction, VA. The other book, primarily text, is "
Victory Rode the Rails, The Strategic Place of Railroads in the Civil War
," George Edgar Turner, 1953/1981/1992, University of Nebraska Press. Also, you might want to get a copy of Buster Keaton's 1927 silent epic, "
The General
." My copy is a tape, VHS No 4042 from
Critics' Choice Video
, but it may be available on DVD by now.
Bob
"Time flies like an arrow - fruit flies like a banana." "In wine there is wisdom. In beer there is strength. In water there is bacteria." --German proverb
Reply
jrbarney
Member since
January 2002
1,132 posts
Posted by
jrbarney
on Saturday, December 13, 2003 8:40 AM
Ron,
Sorry about the incomplete staff work. Cohen's URL is:
<http://www.jaystrains.com>
As I recall, he does advertise in
MR
, and does send catalog pages quarterly if you become a purchaser. Guess I didn't include his URL the first time because I didn't want to favor him over possible other "fallen manufacturer" vendors.
Bob
"Time flies like an arrow - fruit flies like a banana." "In wine there is wisdom. In beer there is strength. In water there is bacteria." --German proverb
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, December 12, 2003 9:16 PM
Ron where in Illinois are you? I'm going to start modeling 1870-1890 myself, so if your close we could bash ideas together and maybe even learn a few things about scratchbuiling old buildings.
Jay
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, December 12, 2003 7:50 PM
Thanks, all!
I've got a great photo of the turntable I will model and may try a scratch build. My biggest concern (mainly because I haven't tried to scratch build anything, yet--but I know that I'd better get that in my modeling toolbox if I am going to stay in this time period) is wiring for correct polarity of the rails.
Bob wrote, "I don't recall if Jay Cohen or other "fallen manufacturers" outlets have offered any of these kits." Is there some sort of directory of "fallen manufacturers" outlets? Does Jay Cohen advertise in any of the magazines or have a website?
RoN
Reply
Edit
coalminer3
Member since
January 2001
From: WV
1,251 posts
Posted by
coalminer3
on Friday, December 12, 2003 3:45 PM
USMRR = United States Military Railroad
work safe
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, December 12, 2003 2:31 PM
What is USMRR?
The structure on the middle of the turntable is used for turntables equiped for electical motors. This would certainly be not the case in 1865, no electricity then! The name evades me at this moment, but cantinary comes to mind...?
Colin
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, December 12, 2003 8:48 AM
I scratch built my turntable, it wasn't hard. It was great fun really. Haven't had any problems with it in the three or so months since i finished it.
the bridge was made of styrene sheet, angle, square stock and I beam.
the pit was plywood and plaster and the pivot was telescoping brass tube and styrene as the insulator.
great fun and in my opinion better looking than the kits that were on the market for that size (75ft). Total cost, about £10 if that ($15).
back of the net!
neil
Reply
Edit
jrbarney
Member since
January 2002
1,132 posts
Posted by
jrbarney
on Friday, December 12, 2003 8:15 AM
Ron,
Years ago,
Cliff Line/Robico
sold a 57' (nominal) old time 'Gallows' turntable, their item TA-11. You might be able to find one at a "swap meet" or estate sale, possibly built up. I don't know if anyone took over the
Cliff Line/Robico
assets. I don't recall if
Jay Cohen
or other "fallen manufacturers" outlets have offered any of these kits. Good luck, but you may be in for some scratch building. It would be nice if some vendor offered a suitable center pivot for scratch builders already prewired.
Bob
"Time flies like an arrow - fruit flies like a banana." "In wine there is wisdom. In beer there is strength. In water there is bacteria." --German proverb
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Thursday, December 11, 2003 11:06 PM
the turntable by Atlas scales out to around 65', try that.
http://www.walthers.com/exec/productinfo/150-305
Jay
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Turntables
Posted by
Anonymous
on Thursday, December 11, 2003 9:32 PM
I model USMRR in 1865. For the section I am modeling, the USMRR was using only 4-4-0 engines; therefore, only needed a 60' turntable. I have not found a supplier that offers a 60' HO turntable. CMR offers an N scale turntable that is approximately 60 scale feet in HO. Can this turntable be easily converted from N to HO? The photo in the ad also shows it with some sort of tubing that crosses over the platform (if that's the correct nominclature) at the mid-point. Is this purely decorative or does it have something to do with the wiring?
Thanks for your input.
RoN
Reply
Edit
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up