Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

powering accessories

2513 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
powering accessories
Posted by Anonymous on Saturday, November 29, 2003 8:09 PM
Do you have to use transformers to power accesories or is there inexspencive way to do so. What else could be used some sort of converter to come straight out of a 110v wall plug.
  • Member since
    October 2012
  • 527 posts
Posted by eastcoast on Saturday, November 29, 2003 9:02 PM
I do not recommend going direct to a wall plug without
some sort of resistor or transformer.
You could use battery power for individual areas and looks cool.
Other than these, use a separate power pack for the accessories
and the main packs ( DC ) for your trains.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, December 2, 2003 10:42 AM
why not wire it in with your lights on the layout if you have them with a diffrent switch to turn then on??
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, December 2, 2003 11:05 AM
QUOTE: Originally posted by keenanc

Do you have to use transformers to power accesories or is there inexspencive way to do so. What else could be used some sort of converter to come straight out of a 110v wall plug.


DO NOT POWER ANYTHING DIRECTLY FROM A WALL PLUG WITHOUT A TRANSFORMER THAT IS UL RATED FOR 120 VAC!!!!

A wall-mount plug-in transformer (the typical 'AC Adaptor') with AC or DC output at various voltages is useful for accessories.

The transformer does several things directly related to safety.

1. Lowers voltage to a safe level.
2. Helps protect the user from exposed wiring power surges such as those induced by lightning strikes.
3. Isolates the layout wiring from the hazards of potential from AC outlet to earth ground.

The model railroad track and layout wiring is most definitely "exposed wiring". Using series resistors to run accessories directly from a wall outlet is a good way to end your model railroading career forever - and the life of anyone else who may come in contact with hazardous voltages.

Always use a transformer.

  • Member since
    March 2003
  • 88 posts
Posted by denny99 on Wednesday, December 3, 2003 5:02 AM
QUOTE: Originally posted by keenanc

Do you have to use transformers to power accesories or is there inexspencive way to do so. What else could be used some sort of converter to come straight out of a 110v wall plug.


you can buy one at electronics shop. ask for a 110V AC -> 15V DC transformer. just make sure that its power is enough to supply current your stuff need. I think 3A or more could be a good start.
the trasformers I'm talking about are very similar to the ones you often use in you real life, like mobile phone charger, or portable cd-player charger, or optical fiber christmas tree :)

don't use any self-built stuff to connect to 110V unless you are definately sure bout what you're doing and your electrical skill is high enough to avoid shocks.

as we say in italy: man warned, half safe :)
Denny Modeling the SP Coast Line in N scale in 1974
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, December 3, 2003 9:07 AM
Lighting a layout need not be expensive. White X mas tree lights can be used and are $1 for a package of 20. You could use them out of package on 110, or cut them up and power them on low voltage. I get my transformers at yard sales and flea markets. The little wall packs that charge you dustbuster, power screwdriver, computer speakers, etc. can be used to power you lights after the unit they were ment to power die. They have voltages between 1 and 60 printed on them, so you series enough x mas tree bulbs to eat up the power. An example is the 20 pack I mentioned above are aprox 6 volts each, so 2 in series will glow bright with a 12 volt wall pack, or dimmer with an 8 volt one. I find the 8 volts will be better as the bulbs will last forever? and not get as hot. I have some 2.2 volt ones from a 50 bulb set that have ran for 5 years this xmas on aprox 1.6 volts. Also, for lights it matters little if it's an ac or dc pack. For other items research. As to how many lamps a wall pack will run, well that's a matter of feel, if the wall pack gets warm you are powering too many lights. That's the unscientific method I use. FRED

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!