Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
Layouts and layout building
»
swing gate with using simple carpentry
swing gate with using simple carpentry
2340 views
3 replies
Order Ascending
Order Descending
ndbprr
Member since
September 2002
7,486 posts
Posted by
ndbprr
on Tuesday, November 11, 2003 8:07 AM
Those suggestions involve a LOT of mechanical interlocks that require maintenance and fine tuning. Previous builders of removable bridges and gate have used electrical interlocks that are much easier to maintain. I recall one individual who had two holes drilled in which he placed a drop or two of mercury to contact the wires when the bridge was in place. I have also seen contacts, reed switches and other methods used. If they control 2-3' either side of the chasm it is very difficult to have a train take the plunge and a lot easier to troubleshoot and maintain.
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Tuesday, November 11, 2003 4:40 AM
Maybe you could set it up so when the gate is open, some kind of barrier raises across the tracks to avoid disasters? You could rig it so that when the gate is closed, the lever you use to lock it in place also lowers the barrier. Failing that, you could consider "Catch Points" (I think these are called derails in the US, they're used to prevent rolling stock "running away" and ending up on the main line). Peco offer these. just fit them a decent distance away from the gate and consider some form of electrical interlock so they can't be switched to allow stuff to run over them when the gate is open.
Reply
Edit
ndbprr
Member since
September 2002
7,486 posts
Posted by
ndbprr
on Monday, November 10, 2003 3:42 PM
A swing gate is an excellent way to go if you remember these considerations:
1. Make sure there is adequate space for it to swing open and adequate space to stand in to close it
2. Make it is the shape of a triangle so it won't sag
3. C clamp the finshed product in place to insure it is level and functioning before superglueing (joking :-) ) it in place
4. Use a long hinge like a piano hinge for maximum support the full length of the support leg. This is much better and aligns better than two door hinges
5. Consider weighting the gate so it swings shut on its own in case your interlock fails
6. Use something with a pin (two holes with a nail will work) to make sure it is alligned for operation and interlock 2-3 feet of track on either side to prevent catostrophic events from occurring when it is open. You can only catch so many cars and engines doing the half gainer
Reply
scotttmason
Member since
February 2002
From: within earshot of CP
64 posts
swing gate with using simple carpentry
Posted by
scotttmason
on Monday, November 10, 2003 3:02 PM
Got an idea while reading another thread about avoiding a duck-under along with achieving continuous running option. Worked up a sequence for construction of an area to become a gate as a single assembly. Then, by parting section at a pre-determined locations, the gate section is freed without a lot of hastle.
http://www.goesstudio.com/tutorials/swing_gate.pdf
This may have been done already; but could be a good solution to gate construction either way. Haven't gotten this far in my construction so just a concept at this point.
Thoughts welcomed.
Got my own basement now; benchwork done but no trains, yet.
Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up