Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Athearn Genesis DD40AX Question

4882 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2005
  • 211 posts
Posted by mcddhawk4 on Tuesday, August 19, 2014 5:53 PM

Thanks for sharing your thoughts on this post, I'm going to be building a new 2' x. 12' switching layout,I'll be using peco code 83 number 8 switches and 1 number 6 crossing something to do till I get the man cave finished. 

BNSF FAN
  • Member since
    July 2006
  • From: west coast
  • 7,667 posts
Posted by rrebell on Friday, August 15, 2014 10:43 AM

It will go (at least the old one would) on an 18" radius, that was all it did and just barely as we put one on my 18" radius high steel trestle just for fun, couldn't go anywhere do to clearance problems, just wanted to see if it would fit.

  • Member since
    November 2002
  • From: US
  • 2,455 posts
Posted by wp8thsub on Friday, August 15, 2014 10:17 AM

One of my buddies brought a Genesis DDA40X to run on my layout for a test.  It ran fine through #6 turnouts and 28" radius curves,  I wouldn't say it looked great in the process but it did work.

Rob Spangler

  • Member since
    January 2010
  • From: Denver, CO
  • 3,576 posts
Posted by Motley on Friday, August 15, 2014 10:09 AM

Ya those DD40AX are beasts. When manufacturers list minimum radius, they always under estimate this.

So if they say minimum is 28" radius, what they really mean is 30" min.

I would say a #6 switch would be fine.

So if you want the loco, I would increase your curves on your layout to 30" with #6 switches.

Michael


CEO-
Mile-HI-Railroad
Prototype: D&RGW Moffat Line 1989

  • Member since
    September 2004
  • From: Dearborn Station
  • 24,281 posts
Posted by richhotrain on Friday, August 15, 2014 7:17 AM

Larry, now you got me trying to visualize a DD40AX moving through a 15" curve.   Laugh

Rich

Alton Junction

  • Member since
    October 2001
  • From: OH
  • 17,574 posts
Posted by BRAKIE on Friday, August 15, 2014 6:30 AM

richhotrain

I don't own a DD40AX, so I cannot provide an answer based upon experience.

But, I feel certain that the loco could negotiate the divergent route on a #6 turnout.  On the other hand, I think that a #4 turnout would be problematic - - - too tight for all of those axles.

Rich

 

The older BB DD40X could go through a  Atlas custom #4--very ugly to watch but,it did.

While I have no direct experience or observation of this event I'm told the BB DD40X would go around a 18" curve without cars in tow.That I would have like to seen--if  it really happen at all.

Seeing the Genesis is more to scale I suspect a #8 switch would look and work better.

Larry

Conductor.

Summerset Ry.


"Stay Alert, Don't get hurt  Safety First!"

  • Member since
    September 2004
  • From: Dearborn Station
  • 24,281 posts
Posted by richhotrain on Friday, August 15, 2014 5:31 AM

I don't own a DD40AX, so I cannot provide an answer based upon experience.

But, I feel certain that the loco could negotiate the divergent route on a #6 turnout.  On the other hand, I think that a #4 turnout would be problematic - - - too tight for all of those axles.

Rich

Alton Junction

  • Member since
    April 2005
  • 211 posts
Posted by mcddhawk4 on Thursday, August 14, 2014 9:38 PM

what would be the smallest size switch that this beast can travel through?

BNSF FAN
  • Member since
    September 2004
  • From: Dearborn Station
  • 24,281 posts
Posted by richhotrain on Wednesday, August 13, 2014 4:23 PM

DD is a two-truck diesel, and each truck has 4 axles.  So, I am not surprised that the loco requires a 28" minimum radius on curves.

Rich

Alton Junction

  • Member since
    April 2005
  • 211 posts
Posted by mcddhawk4 on Wednesday, August 13, 2014 4:10 PM

I found out today that the minimum radius for this locomotive is 28'' did a Google search after getting the idea from another post

BNSF FAN
  • Member since
    April 2005
  • 211 posts
Posted by mcddhawk4 on Friday, June 6, 2014 11:47 PM

I'm looking to run it on a layout with a 26'' minimum radius thanks.

BNSF FAN
  • Member since
    July 2003
  • From: Sierra Vista, Arizona
  • 13,757 posts
Posted by cacole on Friday, June 6, 2014 5:15 PM

I was going to suggest that you refer to Athearn's web site and see if the minimum radius was listed in the specifications for this model, but what I read about it the radius is not specified.

www.athearn.com 

A club member has 4 of the Bachmann DDA40X locomotives, and from what I've seen with them they may go around a 20 inch minimum radius, but the overhang at the ends will pull rolling stock off the track and they will look horribly out of place going around that tight a radius.  Even on our club's minimum 24 inch radius they look ridiculous.

  • Member since
    April 2005
  • 211 posts
Athearn Genesis DD40AX Question
Posted by mcddhawk4 on Thursday, June 5, 2014 11:05 PM

What is the minimum radius the DD40AX will handle? Thanks Martin

BNSF FAN

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!