Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
Layouts and layout building
»
Why adding power to the switch?
Why adding power to the switch?
2847 views
7 replies
Order Ascending
Order Descending
Anonymous
Member since
April 2003
305,205 posts
Why adding power to the switch?
Posted by
Anonymous
on Wednesday, November 26, 2003 2:28 PM
Why is it that some poeple say it's better to take electricity from the track and route it thru the switch (turnout)?
I didn't solder power (electricity) connections to my turnouts and none of my trains have problems with it. Of course I solder power feeder to the tracks ahead and behind the turnouts, but not to THE turnout.
So why add power to turnouts? Seems to me it's quite the job...
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, November 26, 2003 2:32 PM
...and I operate DCC. Don't know if that makes a difference?
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, November 26, 2003 2:56 PM
For clarification - Are you talking about "power routing" turnouts?
Andrew
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, November 26, 2003 3:08 PM
Since you have track power wired with feeders, you don't have to power the turnouts. Some people, including me, like to power the frog from contacts on the turnout motor. It is not needed except for some special things like old or "toy" type locos that don't have good power pickup.
With any reasonably modern loco you don't need to do that.
Ken
Reply
Edit
CP5170
Member since
October 2009
129 posts
Posted by
CP5170
on Wednesday, November 26, 2003 3:37 PM
Sorry CN11, I misinterpreted your question. I've done exactly as you have done and have not experienced any problems.
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Wednesday, November 26, 2003 4:15 PM
Yes! Power-routing turnout. What is that for?:
No worry. Sometime I can't explained things to myself either..
Reply
Edit
IRONROOSTER
Member since
June 2003
From: Culpeper, Va
8,204 posts
Posted by
IRONROOSTER
on Wednesday, November 26, 2003 6:57 PM
In power routing turnouts, the frog is not electrically isolated from the points. The electrical connections are made to the approach rails (either directly or through metal rail joiners). Thus the frog and the rails connected to it have the same polarity as the rail the switch points are against. There are at least three adavantages claimed for this arrangement. 1. There is no electrical dead spot in the frog thus locos with only one wheel pickup (or a short wheel base) don't stall. 2. The track that is not selected is electrically dead because both its rails have the same polarity. Thus any loco on that track won't move and a siding can be used to park locos. It also prevents locos from running into points set against them. 3. It looks better(more prototypical). If you use this, you must use insulated rail joiners on either diverging track before another electrical connection or completion of a circle with that track . Otherwise you get short circuits.
Enjoy
Paul
If you're having fun, you're doing it the right way.
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, November 28, 2003 1:16 AM
Thanks for the info.
Reply
Edit
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up