Edit topic

Updated your discussion topic below.

Subject
Enter a subject for your topic. Maximum 150 characters.
Post Body
Enter your post below.
I am in way over my head as far as electronics / wiring goes <br />I have purchased the Aristo Craft Train Engineer and I need help on how to install it in my USA Trains NW2 The instructions say to isolate the motors and connect the Right side motor wire to the Gray wire on the provided wiring harness and the left side motor wire to the orange wire. Looking at the rear of the front trucks at the “power block?” there is a red wire and a black wire on the left side and a red wire and a black wire on the right side. Are the black wires common or are both power wires? Do I need to cut both to isolate the motor or just one color? Any help would be appreciated. <br />Thanks, Ted <br />
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
E-mail Subscribe
Check the box below if you want to receive e-mail notifications when replies are made to this thread.

Receive notifications