Edit post

Edit your reply below.

Post Body
Enter your post below.
Hello Jeff, Setting up what you would like is quite simple: Our techie recommends: Replace one of the 10000 (1ft)  sections with a  12150 (R1LH) turnout, attach a 12150 turnout to the first one. Then add the required 10000 pcs - on on the straight section of each turnout. Add the 12pcs of 11000 (R1) and the two 10000 (1ft) pcs and you're done. The geometry matches perfectly. Of course you could add two 12050 turnouts in the other side of the ovals, then you could move from the outer to the inner circle and back again without reversing direction or backing up the train. [img]http://www.easternmountainmodels.com/TrackPlans/R1_R2oval.jpg[/img] Hope that answers your question. Best regards ER
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag