Edit post

Edit your reply below.

Post Body
Enter your post below.
Well, the current draw on the USA F units is less than the famous GP9... The current readings you see are full stall at 24 to 27 volts typically. My DCC system is NCE, and right now, I put out 20.1 volts RMS, so right off the bat the current draw is less. 2 locos running NCE 8 amp decoders each, under heavy load is pulling about 3.7 amps at worst case. The downside is that my top speed is about 58 scale miles per hour, ok for freight, but slower than prototype. The upside is that nothing burns out, the booster, decoders, etc. Hope this information is useful, Greg
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag