I set up my older Carrara 1/32 set in a 6ft oval just to see how things looked. Things look ok with the 1/32 cars. The cars are around 5.5" inches long. The only problem is that I don't think there is a way to set them to run around the track at one voltage. I can't seem to hold the trigger at a voltage that the car goes around the track without slugging around the corners, or zooming in the straights. I think at a minimum, I would have to pull out all of the magnets inside the car to require less juice to move it, then I would probably need to chop off the plug on one of my extra controllers and mate it up to the output of a DC transformer from an HO or N guage set. That might work. There are 3 prongs on the controller, so I will need to investigate to see what that third one is for. All in all, since I own the sets already, they look ok. the 1/43 would look better. I don't know if you can get them to creep along the track, but they look OK sitting there.
Wes
Superstreets is still the way I plan to go. Just for the fact that it's more to scale and you can run trolley's on it. I don't have enough room to make a real raceworthly track, and I have seen cars fly off and hit stuff constantly with the wrong driver, so real racetrack isn't ideal. I had a bunch of Carrara track in storage and thought I would try it. Superstreets finally was delivered to my LHS right before Christmas. That's probably where the next $100 goes...
seacoast, I have H.O. race cars and know of two places in West Palm Beach FL that handle H.O. race cars, both cars and track. They are not dead, just overlooked alot of times, also new company is making the old Aurora style cars called Johnny Lightning, and a another new company bought out the rights for Model Motoring a.k.a. the old track style of Aurora H.O. race cars. Also one other company is making H.O. race cars, Life Like.
pbjwilson, I like your idea about using race cars from Walgreens for your layout, I did not think about that. Might be too late for this layout as I am very crowded for space right now. You might be able to buy a two train transformer in H.O. to control your race cars if they are D.C.
A quick note about Super Streets, I can run Lionel passenger cars # 6-15104(Reading company) & 6-7012(New York Central) on the small size curves, locomotive was the Plymouth switcher. Play around with Super Streets and your rolling stock and you may be surprized at what goes through the Super Street curves.
Lee F.
I've been looking into this. They make a 1/43 scale slot car, pretty close in size and readily available. I'm also using Lego's for my buildings and people.
Many years ago, back in the 60's, Ideal Toy Co. made a line of slot cars called Motorific. These cars were 1:48 scale. You can find a few still on ebay. Since these cars and trucks were battery operated they wouldn't require special track. If you were handy with power tools you could cut grooves for the slot pins in the roadways of your layout with a power router.
Modeling the "Fargo Area Rapid Transit" in O scale 3 rail.
BoydWow I started this thread 10+ years ago.
I have figured out what is wrong with my brain! On the left side nothing works right, and on the right side there is nothing left!
Okay I didn't read every comment but I do remember back in mid 60's aurro or how ever you spell it had a track that ho trains could cross there race track as a friend had it on there layout. we use to see if we could beat the train at the crossing a lot of the time lol.
I have seen also where some use super streets for a section of track to go thru town for the train the go back to regular track and it looks realistic and nicely done.
Life's hard, even harder if your stupid John Wayne
http://rtssite.shutterfly.com/
rtraincollector Okay I didn't read every comment but I do remember back in mid 60's aurro or how ever you spell it had a track that ho trains could cross there race track...
Okay I didn't read every comment but I do remember back in mid 60's aurro or how ever you spell it had a track that ho trains could cross there race track...
There was a company called "Lionel" back in the 1960's that had the same set up with road/rail sets in their catalogs with the requisite grade crossing(s) for the slot cars.
Rob
that may of been who all I know it was in HO that was when I was like 9 and I'm about to turn 61
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month