I stopped at Wal Mart and went into the crafts department and bought a round green foam disc thats 1-15/16" wide by 3-7/8". Its circumference is 12.25" so its just a little over 1 foot around it. I ran white tape around it and then marked the center, drilled it and then put a pencil in the middle. And then used a marker and marked 1 spot on it so I could count revolutions. The white tape does not grip the track well, so I will replace it with either duct tape or electrical tape so it grips the rails better. The climbing grade on my layout is 48 feet long, climbs 10.5" and now I know the grade is under 2%. Though I think the grade varies and needs some adjustment.
Modeling the "Fargo Area Rapid Transit" in O scale 3 rail.
Boyd,That sounds interesting. At one point I had kept track of how many of each section of track I used... lost the paper... As for fluctuations in the grade... buy a longer engine... LOL! I haven't had any problems with GP7s, SD9s, GP30s, etc, but as soon as I set the AC6000 on the track and set her off at a slow crawl I found 3 spots where the track dips about 1/4 inch - just enough to cause her to lose connectivity... now I have some work to do before I go any further on scenery. LOL!
Y'know, this is interesting. I made a decision to stop trying to even out the layout (it's built atop an uneven crawlspace) and just jockey the throttle - and train load. For example, there's a grade on Percy's usual track - as an 0-4-0, he just can't make it with 5 loaded wagons, so I plan his train load-out appropriately. Adds to the fun I guess.
Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month