lionel2;
Same set up as the 3356 operating horse car. OTC Contactor and 364C Controller. I imagine you could use any type of on off switch in place of the 364C. There is only one pickup shoe so it is conceivable that you could use an uncoupling section with control rails. When you push the unload button, one of the control rails is "hot" and the other is ground. If you have the UCS section with screw terminals to connect the controller, you could wire the on-off switch to activate the control rail. Be sure, though, that you do not use the control rail that is also wired to the uncoupler magnet. Once you know which rail gets the "hot" connection you could place the corral so the car would line up properly. As far as color of corral and car, the circus car probably has the same problems that the white milk cars suffers from and that is discoloration of the plastic over the years. Hope this helps. Happy Thanksgiving!!
Mel Hazen; Jax, FL
Mel Hazen; Jax, FL Ride Amtrak. It's the only way to fly!!!
Here's a little video of the Circus Car in action.
Circus Car Video
Robert
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month