Trains.com

News Wire: Virginia governor signs WMATA safety commission bill

2441 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
Moderator
  • Member since
    January 2011
  • From: Wisconsin
  • 1,532 posts
Posted by Brian Schmidt on Monday, March 27, 2017 9:43 AM

RICHMOND, Va. – Virginia Gov. Terry McAuliffe has signed into law a bill authorizing a multi-state safety commission for the Washingon Metropolitan Area Transit Authority. The Federal Transit Administrations requires that WMATA set up the safe...

http://trn.trains.com/news/news-wire/2017/03/24-virginia-signs-wmata-safety-commission-bill

Brian Schmidt, Editor, Classic Trains magazine

  • Member since
    March 2016
  • 1,568 posts
Posted by CandOforprogress2 on Sunday, April 2, 2017 1:16 PM

More bureaucracy and just for one agency and who pays for this?

  • Member since
    June 2002
  • 20,096 posts
Posted by daveklepper on Wednesday, March 6, 2019 3:32 AM

WMATA tests automatic door operations


Passengers board the Orange Line at the New Carrollton Metrorail station. Photo – WMATA, Larry Levine

The Washington Metropolitan Area Transit Authority (WMATA) is considering a systemwide adoption of an automatic door opening feature on its passenger trains, agency officials said yesterday.

For the past two weeks, WMATA has been testing and calibrating the feature that had been discontinued for years. 

Automative door opening and automatic train operations were part of the original design of the Metrorail system, but have remained unused for years due to “reliability problems,” WMATA officials said in a press release. 

Now, WMATA may be returning to its automatic door opening feature later this year, granted its additional testing — conducted over the next several weeks — goes well.  

The feature could eliminate wrong-side door incidents by train operators, as well as reduce door-open delay, a behavioral safety check protocol WMATA established that required operators to pause several seconds prior to opening doors to reduce the risk of a mistake.

When in automatic-door mode, the train receives data on its exact location from transmitters located on the track. After the train comes to a complete stop and is confirmed to be properly “berthed” at the platform, the doors automatically open on the appropriate side of the train.

Train operators will continue to be responsible for closing doors.

Reply | Reply to all | Forward | Print | Delete | Show original

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy