GE 25-tonner info

[Alex V.]

Could someone kindly give me the following dimensions for a GE 23 or 25-tonner?  Thanks.

1. Cab length (depth)

2. Cab height

3. Hood width

4. Hood height

[dldance]

It will take me a week or so to get back to you but I can measure one.  Any other dimensions you want while I am at it?

dd

[blue streak 1]

GE used to have a repair facility in Chamblee, Ga. where all the small switchers were overhauled. I have no idea if it still is there. If it is bet they could give you all the information.

[Alex V.]

"dldance"; Through thinking and laying my project out, I now need the measurements for a boxcab 23/25-tonner.  Since these don't have a hood, the only applicable measurement would be cab height, right?   I think that's about the only measurement I'll need.  Thanks.

[dldance]

Golden Spike uses a GE 25 tonner with conventional (not box) cab for moving the steam locomotives around when not under steam.  Right now - as we are in operating season - the GE is parked in a secure place about 1/4 mile from the engine house.  So my plan was to go early on my normal volunteering day, get access to the locomotive and measure it.  I will still measure cab height but it is from a conventional cab.

dd

 

[Alex V.]

Well, my 25-tonner project has gone down the tubes.  I'm sorry if I put anybody to any trouble.  Oh well, a project for another year!  Thanks, guys.

[dldance]

here is the information anyway:

Cab height - 121.5 inches from rail head / 78 inches from deck

Length - 182 inches excluding couplers

Width - 96 inches

Hood height - 57 inches from deck

Hood width - 48.5 inches

dd

 

 

[Alex V.]

Thank you.  I may wind up needing that info some day, so I'll save it.

[dldance]

I hope the 25 tonner is still running then.

dd