Trains.com

News Wire: Contractor for 1309 says locomotive brasses part of metal stolen

4046 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
Moderator
  • Member since
    January 2011
  • From: Wisconsin
  • 1,532 posts
Posted by Brian Schmidt on Friday, February 23, 2018 11:24 AM

CUMBERLAND, Md. — Brass components weighing 300 pounds each were pulled off former Chesapeake & Ohio 2-6-6-2 No. 1309 and sold to a local scrap dealer, according to Gary Bensman, a principal in Diversified Rail Services that is restoring th...

http://trn.trains.com/news/news-wire/2018/02/23-contractor-for-1309-says-locomotive-brasses-part-of-metal-stolen

Brian Schmidt, Editor, Classic Trains magazine

  • Member since
    September 2003
  • 21,669 posts
Posted by Overmod on Friday, February 23, 2018 1:53 PM

This raises a further question: were the brasses ruined 'during' the theft, or were they screwed up (and hence rendered little better than scrap) due to a blunder (perhaps by Scottie) during the course of teardown.  If in fact both the brasses and hub liners were rendered completely useless in the latter case, the implied harm to the restoration is nowhere near as onerous, or the evil of this particular crime as great, as if intact or expensive-to-make 'salvageable' parts were the things stolen.

  • Member since
    March 2013
  • 426 posts
Posted by Dr D on Sunday, February 25, 2018 11:48 PM

Overmod,

This is a real shame -

The transporting of the locomotive - the careful disassembly of the many components - the evaluation of the boiler, flues, superheaters - retrieval and examination of the multiple front end throttle.  The evaluation of the condition of the rods, pistons, packing, rings, head gaskets.  The disassembly of the lubrication system, lines and many fittings.  The removal of front end stack, netting and exhaust.  The searching for headlights, marker lights, whistle, safety valves, boiler check valves, injector and feed water heater.  The repair and disassembly and repair of the cross compound compressor and its parts piping valves.  The repair and replacement of long out of production electrical fittings, turbo generator lighting, cab instruments, gauges - cab fittings from reverse to throttle - the stoker system and auger screw.  The removal of the drawbars and pins -

The list is endless as are the searching for the service providers.   

Isn't it difficult enough to undertake the restoration of a famous locomotive without having to deal with sabotoge by the very people who should know and care about it? 

What kind of man lends himself to the work - day by day - the fellowship and comradery - and is knowledgable about the importance the art and the technique - and the difficulty - and then pulls a stunt like this?

One can excuse a cash strapped railroad from gaining one more dollar by scrapping steam - one can excuse an ignorant community from looking at a rusting locomotive as a pile of junk.  One can excuse the rogue scrappers of todays cities from trying to get away with another buck by swiping parts or collectables.

But for a restoration worker involved in the immense process or putting back together such a locomotive - to steal and sell the bronzes - for the cash metal value - this is outrageous!  As is the managment for allowing such things to happen.  Is it any wonder that Class 1 railroads look at the restoration community like they do? 

It's a crime of the heart.

Thanks to modern America for generating such sons!

- Dr. D

  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Monday, February 26, 2018 6:01 PM

Maybe they should have just bought a pair of SD40s and called it a day?

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

  • Member since
    March 2016
  • From: Burbank IL (near Clearing)
  • 13,540 posts
Posted by CSSHEGEWISCH on Tuesday, February 27, 2018 6:47 AM

zugmann

Maybe they should have just bought a pair of SD40s and called it a day?

 
I assume that you posted this with tongue firmly in cheek but a pair of SD40's in WM "circus" colors would look just dandy.
The daily commute is part of everyday life but I get two rides a day out of it. Paul
  • Member since
    January 2002
  • From: Canterlot
  • 9,575 posts
Posted by zugmann on Tuesday, February 27, 2018 4:55 PM

CSSHEGEWISCH
I assume that you posted this with tongue firmly in cheek but a pair of SD40's in WM "circus" colors would look just dandy.

I was actually serious.

It's been fun.  But it isn't much fun anymore.   Signing off for now. 


  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.t fun any

  • Member since
    July 2006
  • 289 posts
Posted by bagal on Thursday, March 15, 2018 4:04 AM

Happens in other parts of the world as well

https://www.odt.co.nz/news/dunedin/sadder-wiser-society-gets-back-work

Bill

  • Member since
    August 2010
  • From: Henrico, VA
  • 8,955 posts
Posted by Firelock76 on Thursday, March 15, 2018 8:58 PM

Non-ferrous metals like brass, bronze, and copper bring a lot of money in the scrap market.  An NPS Park Ranger at the Petersburg battlefield here in Virginia once told me every once in a while when they do the morning inspection of the park property they'll find a length of chain with a car bumper hooked to one of the bronze 12 pounder Napoleon cannons on outdoor display!  Seems the would-be thieves don't realize those guns have welded steel carriages and just can't be towed away!

There's 1250 pounds of bronze in those gun barrels, by the way.

  • Member since
    May 2003
  • From: US
  • 25,292 posts
Posted by BaltACD on Friday, August 24, 2018 2:14 PM

Never too old to have a happy childhood!

              

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy