Trains.com

Off to the Scrapper!!!!

2647 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2009
  • From: Dallas, TX
  • 6,824 posts
Off to the Scrapper!!!!
Posted by CMStPnP on Wednesday, November 10, 2021 3:51 AM

Norfolk Southern Train pulling various railway equipment to be scrapped.   Sorry to see the ex-Milwaukee E9 go.   The white cables strung along the side of the train, I suspect are air brake bypass hoses for the cars with crappy or non-existent air lines for the brakes.

https://www.youtube.com/watch?v=kWqRbbwFvaE

 

  • Member since
    July 2006
  • 1,468 posts
Posted by NKP guy on Wednesday, November 10, 2021 7:43 AM

CMStPnP
CMStPnP wrote the following post 3 hours ago: Norfolk Southern Train pulling various railway equipment to be scrapped.   Sorry to see the ex-Milwaukee E9 go.   The white cables strung along the side of the train, I suspect are air brake bypass hoses for the cars with crappy or non-existent air lines for the brakes.

   The first comment after the video explains that all of the equipment is owned by a museum and may eventually be restored.  So it is NOT a scrap line.  

  • Member since
    February 2018
  • 282 posts
Posted by adkrr64 on Wednesday, November 10, 2021 7:50 AM

NKP guy
The first comment after the video explains that all of the equipment is owned by a museum and may eventually be restored.  So it is NOT a scrap line.

Some of that equipment looks like it is in reasonable shape for display (like the bigger crane). But unless that museum has a sugar daddy, there is no way some of that stuff (like the E9) is going to be restored anytime soon. 

  • Member since
    May 2003
  • From: US
  • 24,929 posts
Posted by BaltACD on Wednesday, November 10, 2021 8:48 AM

All things considered, the equipment is not in 'that bad' of shape if NS is moving the equipment on its own wheels.  That is a statement that the frames of the equipment are strong enough to withstand the forces that get generated within a train - especially a train that is being handled nominally without working air brakes except for the two gons at the rear of the train.

Restoration is a matter of time and money, nothing more and nothing less.  If you have plenty of both anything that was once made by man can be remade.

Never too old to have a happy childhood!

              

  • Member since
    September 2003
  • 21,324 posts
Posted by Overmod on Wednesday, November 10, 2021 9:42 AM

They did this to get the SDP45 out to move it to Youngstown, I think.

https://fundrazr.com/locomotive?ref=ab_86MPkEEpAFN86MPkEEpAFN

  • Member since
    July 2006
  • 1,468 posts
Posted by NKP guy on Wednesday, November 10, 2021 1:40 PM

   Balt, your comment about the possibilities of restoration once the Will and the money are there reminds me of this comment about Poland from The Man in Seat61:

"Warsaw is like an old knife that's had its blade and handle replaced, as it was almost totally destroyed in WW2 and has been 85% rebuilt...."

  • Member since
    May 2003
  • From: US
  • 24,929 posts
Posted by BaltACD on Wednesday, November 10, 2021 6:52 PM

NKP guy
   Balt, your comment about the possibilities of restoration once the Will and the money are there reminds me of this comment about Poland from The Man in Seat61:

"Warsaw is like an old knife that's had its blade and handle replaced, as it was almost totally destroyed in WW2 and has been 85% rebuilt...."

Of course there is George Washington's original hammer - it has only had the handle replaced 4 times and the head replaced 3 times.

Never too old to have a happy childhood!

              

  • Member since
    September 2010
  • From: East Coast
  • 1,174 posts
Posted by D.Carleton on Thursday, November 11, 2021 1:46 AM

CMStPnP
Sorry to see the ex-Milwaukee E9 go.

The E-unit is the RF&P E8 1002.

Editor Emeritus, This Week at Amtrak

  • Member since
    January 2002
  • From: Canterlot
  • 9,513 posts
Posted by zugmann on Saturday, November 13, 2021 10:16 AM

Overmod
They did this to get the SDP45 out to move it to Youngstown, I think.

Last I heard, that group dropped the project.  They did give a vague reply that "something is in the works".  *shrugs* 

  

The opinions expressed here represent my own and not those of my employer, any other railroad, company, or person.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy