Login
or
Register
Home
»
Trains Magazine
»
Forums
»
General Discussion
»
Hot Boxes
Edit post
Edit your reply below.
Post Body
Enter your post below.
Flat Spots: There are detectors made just for that purpose. Strain gauges are tact welded to the web of the rails. The sensing equipment will trigger after a certain threshold has been crossed when the wheel's flat spot impacts the head of the rail. The ones I've seen measure this in "x" amount of kilograms of impact force. Then, the equipment would automatically send the data via a modem that would print out the data. At some point, the car would be set off for repair. We've had rail break from the force of a really bad flat wheel on a freight train recently. Broken on the same track in 2 different locations along the line. I guess the bitter cold conditions outside didn't help matters. <br /> <br />Hot Box Detectors have been used for years on some railroads in the "reverse sense" of detection - cold wheels. Since the HBD can be triggered by a "differential alarm" setting (how many degrees hotter is one wheel than the other is on the same axle), if one wheel was "cooler" than the other, because of the lack of heat being generated due to a brake not working properly. <br /> <br />Hot Wheel Detectors are optional scanners a railroad can purchase that are mounted on small poles that look for sticking brakes. The HBD isn't really intended by design to detect a stuck brake, but, it can "see" those at times. Especially, with brake shoe particles zooming across the scanning field of the detector's optics. When running calibration tests, the HBD can detect your body heat should you cross in front of the scanners. It won't tell your temperature (you need a "Fever Detector" for that), but, you can cause a slight deflection. Optical focal points come in to play with the detectors, so, you're really not at the right point to be "seen" properly. <br /> <br />The HBD basically makes a comparison between the journal's radiated infra-red energy and the ambient outdoor temperature. When I'm looking over HBD data and see temperatures such as: 17º, 34º, 49º, etc, that's telling me that those journals were actually that many degrees above what the outside temperature was at the time the train was passing over the HBD.
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
Update Reply
Join our Community!
Our community is
FREE
to join. To participate you must either login or register for an account.
Login »
Register »
Search the Community
Newsletter Sign-Up
By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our
privacy policy
More great sites from Kalmbach Media
Terms Of Use
|
Privacy Policy
|
Copyright Policy