Login
or
Register
Home
»
Trains Magazine
»
Forums
»
General Discussion
»
Barber-Bettendorf leaf spring caboose trucks
Edit post
Edit your reply below.
Post Body
Enter your post below.
<p>I have a couple thoughts on this. I believe your observation about the constant weight of a caboose is a significant factor affecting the truck suspension design. Spring rate is also a factor. The spring rate is the rate the spring load increases per unit of distance that the spring is compressed.</p><p>With a coil compression spring of a given diameter and wire size, the rate varies with the number of coils. The greater the number of coils, the less steep the spring rate. In other words, a given applied load will compress the spring with more coils a greater distance than the spring with less coils. Or in still other words, a shorter coil spring is stiffer and harder riding than a longer spring. The shorter spring absorbs shocks in a shorter travel distance than a longer spring. </p><p>There is only so much room for the height of coil springs, so if you want a softer riding spring, an option is to revert to a different type of spring that has a less steep rate. I am guessing that the leaf spring set would have a flatter rate for its height than a coil spring. If so, it would fundamentally be softer riding than coil springs.</p><p>Another factor in suspension is dampening, which is friction to impede the spring movement. When a spring absorbs a shock, its job is done. But it tends to keep reacting by bouncing until the reaction to the shock is dissipated. The friction of dampening impedes the bouncing that follows a shock. On highway vehicles, the dampening is performed by the shock absorbers. On freight car trucks, the dampening is performed by a unique mechanism that creates friction between the truck bolster and side frames.</p><p>Leaf springs have inherent self-dampening by the friction created as the leafs slide against each other as the spring is compressed. Closed coil torsion springs also have self-dampening. However, coil compression springs have no self-dampening, so if dampening is desired, it must be added as a separate device or system. So the self-dampening effect with leaf springs is an advantage. </p>
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
Update Reply
Join our Community!
Our community is
FREE
to join. To participate you must either login or register for an account.
Login »
Register »
Search the Community
Newsletter Sign-Up
By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our
privacy policy
More great sites from Kalmbach Media
Terms Of Use
|
Privacy Policy
|
Copyright Policy