Edit topic

Updated your discussion topic below.

Subject
Enter a subject for your topic. Maximum 150 characters.
Post Body
Enter your post below.
I am on my second turntable (first was Atlas) and get the same problem. Changed to the Walthers Cornerstone series 90, but tried to wire it and get only buzzing from motor. Here is the setup: Lionel Transformer (18v I think, Atlas switch control(not the Twin and not at home to look)has a blue button and moves left to right and makes contact when pressed in right position. Track wiring is OK with a reverse DCC decoder. I am basicly confused with wiring from the shaft (two brass rings and two wires from the brass spring tabs that screw into a plastic bracket that gets fixed to the underside of turntable. The two seperate wires from the motor are directly connected to the transformer. This may be wrong in that when I turn the control knob of the transfromer the motor buzzes. I could use a simple diagarm for the following: Where to the two wires from the brass rings go? Where do the two wires from the brass spring tabs go? Where does the transformer wires connect? Which wires go to the switch? An I confused or what! Thanks for any help :)
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
E-mail Subscribe
Check the box below if you want to receive e-mail notifications when replies are made to this thread.

Receive notifications

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Model Railroader Newsletter See all

Sign up for our FREE e-newsletter and get model railroad news in your inbox!

Subscriber & Member Login

Edit topic

Subject

Post Body

Tags (Optional)

E-mail Subscribe

Subscriber & Member Login

Users Online

Search the Community