Edit topic

Updated your discussion topic below.

Subject
Enter a subject for your topic. Maximum 150 characters.
Post Body
Enter your post below.
I have finally found a good way to convert the NEM coupler pockets on Trix cars to American pockets. After looking at a Athearn underframe, I realized that the pockets do not hold in the couplers with screws, therefore they could go over the hole in the Trix underframe. I cut the pockets off the Athearn frame and am going to put them on my Trix car later today. I have also noticed lately there has been a few posts about building basic car kits. If you are like me and like well-detailed models, you may want to eventually try building a Bowser, Red Caboose, or Branchline car kit. Here are a few lessons I've learned about high end, delicate kits (some of them, the hard way, aka ruining a model.) 1. Use free-flowing plastic cement such as Tenax 7R for plastic to plastic joints, and apply the glue from the inside of the joint when possible. It is also wise to buy a glue applicator for solvent cement, as this makes fine-detail work with separate grabs and stirrup steps a lot easier. 2. Look over a kit before buying it to see if it is easy enough for you. A good high end kit to try when you think you can build one is the Red Caboose HO scale flat car. I just built one yesterday, and as a novice who has only built 3 detailed kits, I can tell you it is very easy to assemble. 3. Don't rush yourself, and only cut off the parts on a sprue you need on the next step. Also, hold the part your cutting off, as these small plastic pieces will often fly off onto the floor, never to be seen again. 4. Use as little plastic cement as you can on joints, because the joint will adhere and look better if you use only a small drop. 5. Build a few Athearn Blue Box or Accurail kits before trying a more delicate kit. This is a warning I didn't heed, and instead the first car kit I built was a R.C. wood reefer-and that didn't go so well. Even if you don't like the looks of molded-on details, you can always change a boxcar into a track cleaning car, or put a large load on a flatcar to hide the out of scale details. Happy modeling
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
E-mail Subscribe
Check the box below if you want to receive e-mail notifications when replies are made to this thread.

Receive notifications

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Model Railroader Newsletter See all

Sign up for our FREE e-newsletter and get model railroad news in your inbox!

Subscriber & Member Login

Edit topic

Subject

Post Body

Tags (Optional)

E-mail Subscribe

Subscriber & Member Login

Users Online

Search the Community