Edit post

Edit your reply below.

Post Body
Enter your post below.
I recieved some images and wanted to post them here: **Thanks to Steve Blackledge for providing them [URL=http://www.imageshack.us][IMG]http://img217.exs.cx/img217/8624/1picturebli7hf.jpg[/IMG][/URL] [URL=http://www.imageshack.us][IMG]http://img185.exs.cx/img185/2372/2picturebli5pm.jpg[/IMG][/URL] Rewiring procedure: 1) Removing the shell; Carefully remove the two handrails at the base of the cab that are attached to the frame Squeeze tabs (4 of them – two in front, two in back) just over the trucks – pull up shell. 2) Unplug red plug that connects shell to circuit board. 3) Unscrew the 4 board mounting screws (Philips head) 4) Under the circuit board you will see three plugs – 2 black and one blue. 5) Pull both black plugs only (male) 6) On one side of the plugs you will find two “tabs”. Lift tab with exacto type knife and the wires will slide out. Reverse both wires on both plugs (that’s four wires) and then plug them (male) back into the sockets (female) 7) Screw 4 board mounting screws back in place. 8) Plug red plug to circuit board 9) Install the shell over the chassis then reinstall the handrails. If you have any questions call us at; 540-949-8300 Ext. 149 service@broadway-limited .com
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag

Update Reply

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Model Railroader Newsletter See all

Sign up for our FREE e-newsletter and get model railroad news in your inbox!