I've heard that putting two engines back to back in a consist only works well if the engines are of the same manufacturer and motor type. I have a couple of old Atlas yellow box locos, one made in Austria by Roco and the other in Japan (by Kato if I understand history correctly). They'd make a great pair in a consist back to back -- they're both old Atlas yellow box but not the same manufacturer. Thotz?
Returning to model railroading after 40 years and taking unconscionable liberties with the SP&S, Northern Pacific and Great Northern roads in the '40s and '50s.
Try it and see. Nothing will explode.
Bill
"Never try to teach a pig to sing. It wastes your time and annoys the pig"
alfadawg01 Nothing will explode.
Nothing will explode.
Righty-o then. I didn't know if that was a good idea. I thought that one motor might be strained by the other but it wouldn't necessarily show signs of distress until I'd ruined it. Thanks a-dawg.
-Matt
Couple them together and give it try. OR, you can place on the track, not coupled together, a few inches in between, and see how they run.
Your not going to wreck anything.
I am assuming that both are DC and your power is from a DC controler.
Mike.
My You Tube
crossthedogI've heard that putting two engines back to back in a consist only works well if the engines are of the same manufacturer and motor type.
It works best if the two engines run at the same speed on the same amount of power, regardless of who built them. Running two engines of the same manufacturer makes it more likely they will run at close to the same speed, but it's not a guarantee.
Generally, you're not going to find any two engines that run at exactly the same rate of speed, one will usually be a bit faster than the other. In DCC, you can adjust the faster of the two engines to slow it down to the speed of the other one. But in DC, if the speeds of the two engines are close - maybe within 10-20% of each other - you should be able to run them together OK.
My guess is the Kato will take off sooner and run better at slow speed. But the Roco drive was no slouch, so I am thinking mid throttle they might just match.