Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Faller Noise Fence 272-180421

1491 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2003
  • From: US
  • 140 posts
Faller Noise Fence 272-180421
Posted by leewal on Sunday, September 20, 2020 9:51 AM

Kit comes with pack of green "shrubs". Seems easy to get it into the fence openings but hiow do you glue it without making a mess. Instructions thin but indicates plastic glue. Lot of small openings. Any ideas.

  • Member since
    August 2003
  • From: Collinwood, Ohio, USA
  • 16,229 posts
Posted by gmpullman on Sunday, September 20, 2020 3:19 PM

I have used hair spray to attach foliage to trees. I like the stuff in the pump sprayer better than the pressurized aerosol. Too much force behind that.

If you have the fence laying flat you could use an eyedropper (plastic pipette) and place a tiny drop of thinned PVA, canopy cement, Elmer's, into each cavity then lightly sprinkle the foliage over top. 

A light brushing to remove the green from the faces of the stone should be all that is necessary once the cement sets. Maybe a light spray with Dullcote to set everything in place after the PVA dries would help.

Good Luck, Ed

  • Member since
    January 2017
  • From: Southern Florida Gulf Coast
  • 18,255 posts
Posted by SeeYou190 on Sunday, September 20, 2020 3:33 PM

I had to Google this product to see what it is.

It looks like a tough job to glue all those little shrubs into the fence openings.

-Kevin

Living the dream.

  • Member since
    September 2003
  • 21,326 posts
Posted by Overmod on Sunday, September 20, 2020 3:58 PM

leewal
Seems easy to get it into the fence openings but hiow do you glue it without making a mess.

Lay it flat, poke shrubs in with a toothpick or similar tool and 'fluff' them as desired, then shoot the whole thing with Dullcote.  If you need more strength, spray first with Damar/Kamar varnish and follow up with the Dullcote.

  • Member since
    May 2003
  • From: US
  • 140 posts
Posted by leewal on Sunday, September 20, 2020 6:30 PM

2 out of 3 for Dullcote. Better than my idea of spraying with adhesive. The Dullcote wil dry, the adhesive would always be sticky.  Thanks.

  • Member since
    May 2003
  • From: US
  • 140 posts
Posted by leewal on Sunday, September 20, 2020 6:50 PM

Thanks. I'm going to try Dullcote. It dries quickly. Hair spray may stay stickey for a while

  • Member since
    August 2003
  • From: Collinwood, Ohio, USA
  • 16,229 posts
Posted by gmpullman on Sunday, September 20, 2020 7:00 PM

Did the kit come with "clump" foliage or is it ground foam, more like a powder?

Clump would have to be poked in one at a time as Overmod suggests.

I was under the impression that it was a loose foliage similar to ground cover. Each would require a different technique.

Regards, Ed

  • Member since
    May 2003
  • From: US
  • 140 posts
Posted by leewal on Monday, September 28, 2020 9:30 AM

It is clump foliage. Poked it in one at a time and spryed with Dullcote. Seems to work OK. I do  few inches at a time. One down and one to go. Patients is not my vertue. Tedius & time consuming but I'm getting there.  Thanks to all who respopnded.

Walt

  • Member since
    October 2007
  • From: Fullerton, California
  • 1,364 posts
Posted by hornblower on Monday, September 28, 2020 1:27 PM

You can always skip adding the vegitation as it has no effect on sound.  I am amazed how many people swear that landscaping stops sound but, since I actually measure these effects for a living, I know that landscaping is no more effective at stopping sound than the cloth grill covering on your stereo speakers.

Hornblower

  • Member since
    September 2003
  • 21,326 posts
Posted by Overmod on Monday, September 28, 2020 1:57 PM

I am not sure why they branded this a 'noise fence' when it is basically a fancy privacy barrier, like the cast block walls in '60s carports.  The 'foliage' is mainly to block view through the voids in the construction.

i have my doubts that even the precast 'noise walls' in many of the modern Interstate-highway improvement projects are really sound rather than privacy barriers.

  • Member since
    January 2017
  • From: Southern Florida Gulf Coast
  • 18,255 posts
Posted by SeeYou190 on Monday, September 28, 2020 2:50 PM

hornblower
I know that landscaping is no more effective at stopping sound than the cloth grill covering on your stereo speakers.

An eighteen foot high dense growth of Sea Grapes or Areka Palms might change your mind.

I doubt the stuff in the Faller style wall does very much.

I barely heard my neighbor Northeast of me when they were out by their pool. Then they did a major trimming of their Arekas, and I can hear their conversations perfectly well.

I can also see them now.

Overmod
I am not sure why they branded this a 'noise fence' when it is basically a fancy privacy barrier,

My friend Lt-Colonal Rob lives in a Community called Paseo in Fort Myers. His house is right behind one of these Interstate noise walls. 

Barriers like this are surprisingly good at blocking noise.

Certainly they do very little for idiots with thumping bass or morons with high-spooling turbos and deleted DPFs on their diesels. However, for filtering normal traffic noises they are almost 100% effective.

Then a noise-making dimwit comes along...

-Kevin

Living the dream.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!