I personally LOVE weathering, and I know a lot of others like it as well. As such, I would love to start this discussion to allow us weathering-loving modelers to share our work, and allow us to exchange our ideas and plans. So, let's get weathering!
To start off, I'll share some pictures of my most recent weathering job, an N Scale Fox Valley Models PS 5344 Single door boxcar lettered for the Apalachicola Northern.
Check out the Balfour and Colucci Creek Southern Railroad, my proto-freelanced N scale model railroad, at bccsrailroad.weebly.com or on Youtube on my channel, N Scale Train Boy.
-Dennis
This is one of my favorite weathering jobs.
.
It was done with a combination of Tamiya Weathering Powders and Citadel Washes.
-Kevin
Living the dream.
Before I tackled the painting and weathering of these structures I did a lot of research on "Prairie Sentinels". If you look closely you will not only see bare wood where the paint has worn off but wood where it had been missed with the paintbrush altogether. This was quite intentional on my part as these had been pointed out in coffee table books on Grain Elevators that I have read. In fact, sometimes they never painted them at all, leaving bare wood to the elements. Also being sloppy and getting paint on the asphalt roofing material was done on purpose as well.
The bright yellow trim I saw in a photo in one of those coffee table books where it stated they would just use whatever paint they had laying around. A little bright for my taste and I plan on dirtying up the paint to tone it down.
I did the peeling paint using the rubber cement method where you dab on rubber cement in spots before painting and just use your finger to roll it off when dry, it is very effective.
My favourite bit is the vertical beam on the wheat bin where the paint has come off. Click on pic for the large view.
Brent
"All of the world's problems are the result of the difference between how we think and how the world works."
I "dirtied" up my SD-9 witha thin wash of flat Black. Kinda gave it that Oxidized faded paint look. The fuel spill stain's on the tank's was a thinned down wash of clear glosscote. The truck's got a 50/50 wash of thinner and Rust, followed by a wash of Black.
Rust...... It's a good thing !
I found a photo of MEC 263 that looked like it had been in some muddy spray, and had to duplicate it
U25s often had a soot buildup around the air intakes at the end of the long hood
GP7 BM 1715 had been painted on a simplified bicenntennial scheme in 1976; a book photo from a few years later showed some hard work and need for a good wash
All from my layout
George In Midcoast Maine, 'bout halfway up the Rockland branch
Test
I'm not sure what happened but my text is hidden behind an inlarged picture and I can't see to edit it. I am using Imgur. Something is not the working the same???
Sorry
Lee
Weathered locomotive and boxcar.
GARRY
HEARTLAND DIVISION, CB&Q RR
EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU
There's so much to love about model railroading and I'm with you Dennis, weathering is one of em'.
POVA 35030 was done a la Gary Christensen with acrylic craft paint wash, pastel chalks & artist oil paint.
Regards, Peter
There are some simple things you can do, even if you lack artistic skills. Here is an ordinary kit built car back from a train show. Notice the shiny black plastic gleam from the trucks.
Here is the same car after I painted the trucks with red auto primer from a rattle can. And brush painted the wheel faces with grimy black. You can also spray paint the undercarriage with light or dark gray auto primer and gentle down the entire paint job with DullCote. The DullCote does good things for overly bright trainset cars. Cars with tarred canvas roofs, cabeese, express reefers, milk cars, and heavy weight passenger cars, look really good after you paint the roof with dark gray auto primer.
David Starr www.newsnorthwoods.blogspot.com
Some more examples of weathering....
This is an Athearn car from the time before I backdated my layout to the late '30s, lettered with custom dry transfers from C-D-S...
It, and a couple hundred other too-modern cars, were sold-off to re-finance more appropriate equipment.
Here's one of the replacement kits, a pretty-much stock Bowser X31A...
This one is a re-painted Train Miniature kit from a train show, with lettering from Champ...
...a Tichy kit, with dry transfer lettering from C-D-S...
This one is a Sylvan kit, with C-D-S lettering. The car is too modern for my era, but since it represents a prototype from my hometown, I used my modeller's licence to make it "okay". It's shown below at GERN Industries in Port Maitland on my layout. Many of the real ones served an industry in the real Port Maitland, and most were weathered even more severely than the car shown, as they were in phosphate service...
This one is from a Tichy kit, with C-D-S lettering, but the maple leaf herald was not in use in the '30s....
...so I stripped the paint and lettering, and re-did the car...
When Train Miniature first came on the scene, I bought quite a few of their cars, especially the Pennsy X-29s, among my favourites. This one has C-D-S lettering and a few added details...
This car, one of three, is TM's doublesheathed boxcar, originally a fairly low-height car. I modified the sides to make the cars taller, and change the ends to create a facsimile of a USRA doublesheathed boxcar, long before Accurail came out with their more accurate version. The TH&B bought 300 of them from part-parent New York Central in 1940, and rebuilt them in their own shops. At that time, Canada was already a year into WWII, with restrictions on steel...
The cars are a year too modern for my layout, and my models, with the herald, would date somewhere in the mid-to-late-'40s. More use of modeller's licence.
Even passenger equipment should get some weathering, but this express car (from an Accurail kit, with C-D-S lettering in the 1954 paint scheme) has gone to a friend's late '50s-era layout...
...a home road express car, from an Athearn Pullman, lettered with a C-D-S alphabet set...
....another home road car, a combine, from a Rivarossi diner...
...and an Express Horse Car, from a Rivarossi coach...
Another modified TM boxcar, this one with decal lettering for his home road supplied by a friend...
This Michigan Cental car was built to match its prototype in a photo, using another low-height TM car...
...by the time of its next re-weigh, it will be re-built as an all-steel car, and that star (beside the LD LMT, indicating lading weight restrictions, will be no longer required).
Here's TM's low height single sheathed boxcar. I added a few details, then used parts of two C-D-S sets to create the proper lettering...
This re-worked Model Die Casting covered hopper, one of six, has C-D-S custom lettering. Only a year old, it's already fairly filthy, assigned mostly to GERN Industries...
An Accurail gondola, factory paint and lettering, with a few detail upgrades...
Lots of dusty miles on this Wright-Trak ventilated boxcar, with decal lettering from Speedwitch Media...
The Speedwitch lettering set had enough for several cars, but most of what remained wasn't in use until the '40s. I picked up three Athearn Blue Box boxcars from the "used" section of my LHS, and made cars for three friends...
Another Pennsy X-29, this one from Red Caboose....
...lettering is from Champ, and the car has been detailed to match its prototype, still in existence.
Another Tichy kit, with Champ decals...
This is an Ertl gondola, picked up at a train show for a couple of bucks. I stripped off the paint and Atlantic Coast Line lettering, then re-painted it in CNR's pre-war black. Lettering is from C-D-S. I don't know if CN owned any such gondolas in the '30s (I have two on my layout) but there were a lot of odds and ends hanging on in those days.The car's original floor insert was badly warped due to improper use of contact cement, so I fabricated a new one using strip styrene, distressed with a razor saw. The car's sides (and possibly some former lading) has stained the wood floor with rust...
Another means of showing age on a car, especially gondolas, is to add some damage and/or leave dunnage or refuse in the car...
Wayne
Here's a string of weathered yellow equipment. Figured I'd keep the posts coming for anyone who wants more.
Some of my weathered material.
SW7:
HOn3 C19:
K-27 in HOn3:
HOn3 boxcar:
Weathered station:
Swedish Custom painter and model maker. My Website:
My Railroad
My Youtube:
Graff´s channel