All layout benchwork builders have encountered the situation where they find they've cut a couple pieces too short. A friend sent me a Youtube video showing a problem solver for this. It is a Duhwalt Wood Stretcher, model BS1000. If you are in need of this, look here:
https://www.youtube.com/watch?v=bgS6-O2APWY
Genius. I wonder if using powdered plastics would embigulate an Athearn 73' passenger car into full length?
Dave Nelson
Well there ya go Dave! Time to get working on that prototype! The market awaits!.
Mike.
My You Tube
If it for real,and really does work, WHY?
I pretty sure I could buy a whole bunch of 2X4s ,and throw most of them away, and still be cheaper then buying it.
And if your in the habit of making the same mistake over and over: not sure a machine will help your problem
I wonder how many "takes" this video took to complete. Real hard not to explode in laughter when you see and hear all of the references to BS.
I hope the folks at DeWalt got a laugh out of this, including their lawyers.
maxmanIt is a Duhwalt Wood Stretcher, model BS1000. If you are in need of this, look here:
Great invention!!! I think I'll buy two! That way I can stretch both ends of my board!
Dave
I'm just a dude with a bad back having a lot of fun with model trains, and finally building a layout!
AWESOME! Unfortunately I do not have room for one in my already too small workspace.
.
Thanks for the fun post.
-Kevin
Living the dream.
mbinsewi I wonder how many "takes" this video took to complete. Real hard not to explode in laughter when you see and hear all of the references to BS. I hope the folks at DeWalt got a laugh out of this, including their lawyers. Mike.
I was thinking the same thing. But I don't think the DeWalt lawyers are laughing.
Bear "It's all about having fun."
UNCLEBUTCH If it for real,and really does work, WHY? I pretty sure I could buy a whole bunch of 2X4s ,and throw most of them away, and still be cheaper then buying it. And if your in the habit of making the same mistake over and over: not sure a machine will help your problem
Shrewd thinking! No flies on you.
Modeling the Baltimore waterfront in HO scale
Plus it doesn't work in pressurized basements anyway.
Years ago I read a small book written by Norm Abram about growing up under his carpenter father titled "Measure Twice, Cut Once". I got the same advice from my junior high school woodshop teacher- and practice it always in my garage shop and on the layout- you can't beat basic common sense!
Cedarwoodron
Still doesn't protect you from measuring twice, even making a nice dark X on the side to cut to, for the saw kerf, and then - cutting ont he wrong side of the line. Now instead of a mis-measured board inches too short because of measuring once, now you have a board that is just short enough to throw an otherwise right angle corner off just enough to be annoying.
Thankfully that doesn't happen very often, or I would definitely be in the market for a BS1000.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
rrinker Still doesn't protect you from measuring twice, even making a nice dark X on the side to cut to, for the saw kerf, and then - cutting ont he wrong side of the line. Now instead of a mis-measured board inches too short because of measuring once, now you have a board that is just short enough to throw an otherwise right angle corner off just enough to be annoying. --Randy
Sure it helps you. When you run the piece through the machine it gets a little longer than original so you can cut it again. And if you cut too short the second time you just run it through the machine again.
They accually do make a board stretcher, it is called a finger glue joint.
Their rival company Block & Docker makes the H(orse)H(ockey)2000 even comes with a free bag of Cow Manure.
I actually was looking through my YouTube video suggestions and saw this.
Maybe the DUH-WALT guys have something to do with this:
https://jalopnik.com/poop-train-full-of-human-waste-is-making-life-in-an-ala-1825398657/amp
Steve
If everything seems under control, you're not going fast enough!
maxman All layout benchwork builders have encountered the situation where they find they've cut a couple pieces too short. A friend sent me a Youtube video showing a problem solver for this. It is a Duhwalt Wood Stretcher, model BS1000. If you are in need of this, look here: https://www.youtube.com/watch?v=bgS6-O2APWY
I see it works on common 2 x 4's. I wonder if it works on baseboards and trim, though. There's been a couple of times it would have been handy.
I think it could also be expanded sideways, and used for plywood. Man, THAT could be real useful.
Ed
7j43k I see it works on common 2 x 4's. I wonder if it works on baseboards and trim, though. There's been a couple of times it would have been handy...
I see it works on common 2 x 4's. I wonder if it works on baseboards and trim, though. There's been a couple of times it would have been handy...
Especially after you spent half an hour making a nice coped corner of a wierd angle and tweaked height... Man that would be handy to just make the piece a quarter inch longer.
And as for measure twice, I changed that rule. Measure three times, go to the lumber yard once.
Genesee Terminal, freelanced HO in Upstate NY ...hosting Loon Bay Transit Authority and CSX Intermodal. Interchange with CSX (CR)(NYC).
CP/D&H, N scale, somewhere on the Canadian Shield