So I found an article today talking about the winter of 48-49, where massive blizzards struck the western states. Reading it, there is a description of Union Pacific using flamethrowers to clear the rails in Wyoming. That's right, flamethrower squads roming the wilds of souther Wyoming on the old transcon; bringing firey death to snow! http://www.standard.net/Local/2014/01/02/Recalling-the-infamous-Utah-winter-of-1948-49Soooo... with that in my mind (and to celebrate the coming spring time weather); what are the most outragous and cool snow battling equipment on your model railroads? Terminals for a large rotary fleet? An army of Jordan Spreaders? Or does anyone perhaps have a squad of veteran flamethrowers raining death on the snow?
At the steel plant where I worked, they usually used wheeled or tracked vehicles for major snow removal, but they also had a jet-powered snow melter for keeping turnouts functioning. Between the noise and the flying debris, you wouldn't want to get too close.On my layout, I have a pretty-much stock Walthers plow...
...and a somewhat modified Jordan spreader, also from Walthers...
I'll eventually add a rotary plow, too, but that's probably a scratchbuilding project.
Wayne
Is this the first you've heard of such equipment?
I don't have room for anything snow related sitting around, except the typical plow on the locos, and even a plow on the rear for the loco I use for switching.
It's always June on my layout, green leaves, birds singing, green grass, summer breezes, rail crews in shirt sleeves, windows open, and beer on ice. along with all of the other very pleasent sights one sees on the streets of summer time.
Mike.
My You Tube
mbinsewiIt's always June on my layout, green leaves, birds singing, green grass, summer breezes, rail crews in shirt sleeves, windows open, and beer on ice. along with all of the other very pleasent sights one sees on the streets of summer time.
In fact; the town of Kowerville has passed laws that ban ownership of any kind of snow removal equipment. Shovels are allowed by permit only.
UNCLEBUTCH In fact; the town of Kowerville has passed laws that ban ownership of any kind of snow removal equipment. Shovels are allowed by permit only.
Hmmm, Kowerville, lets see (heading to Google Maps), doesn't seem to show up, but anyway, it must be a great place to live!
mbinsewi and beer on ice
Cruelity to Animals!!!
"One difference between pessimists and optimists is that while pessimists are more often right, optimists have far more fun."
I do not have one, but Custom Finishing makes a metal kit for a jet snow melter. I have seen video of one of these in use
https://www.walthers.com/maintenance-of-way-mow-work-train-equipment-unpainted-metal-kit-jet-snow-melter
George In Midcoast Maine, 'bout halfway up the Rockland branch
on Flickr
Ah, the Barber-Greene Sno-Loader. I don't have one, but did build a locomotive for a friend which included the steam delivery pipe used with those machines. It ran from the steam dome to the front of the smokebox...
...from there, the connection would be a hose or perhaps a pipe with a swivel connector.
Wayne, I "borrowed" that photo some time ago and filed it along with the other Snow Loader photos I found.
Cheers, the Bear.
Can't really beat a jet engine for darn near anything - melting snow, propelling a locomotive, or, mounted to a tank chassis, blowing out oil well fires (yes, there is such a thing!).
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
Just had to look that up! Jet powered flame displacement!
mbinsewi Is this the first you've heard of such equipment?
Well I am pretty familiar with rotaries, spreaders, plows, and even the jet blowers which blow snow off the tracks. I wasn't that familiar with flamethrowers as snow removal tools.
xboxtravis7992 I wasn't that familiar with flamethrowers as snow removal tools.
Yea, they're something, hey! Through all the years I've been a railroad fan, I've leaned that no matter what you can come up, there's a prototype out there, somewhere.
Go back and check out Dr. Wayne's spreader, he's an amazing modeler. I read where he even used parts from disposable lighters to make the tiny hydraulic ram parts.
We can get some exteme winter conditions here in WI., but I never have been up close to the massive blowers, and equipment that is used daily, in some the western mountain areas.
I’ve never heard of anyone using a flame thrower but I have seen people using a cutting torch to melt the ice on couplers. I have also seen them using a shotgun to shoot down icicles inside of tunnels. I’ve seen rotary plows at work on Donner Pass. They are pretty loud and they throw snow down the side of the mountain which makes a pretty nice run for inner tubes or saucer sleds. When we were kids we were always happy when they would come by. It’s always winter in the mountains on my layout so I have rotary plows, Jordan Spreaders and a flanger. Two of my spreaders are Walthers kits which are the compressed air type. I am scratch building a modern hydraulic spreader. I'm still working on customizing the rotary plows. They will have Southern Pacific style blades which can be opened up to cut a wider path through the snow. They will also have marine windows installed to keep the snow from blocking the view of the operator. And the boiler in the rear will be removed to match the prototype and a door from an old F7 B unit will be added.
While actual plans would be good, I’ve enough different photos from different angles, (More would always be better) to have started drawing HO scale plans of what will hopefully be a reasonable facsimile. on Flickr The big problem is where it will end up on my list of things to do!!
Wow, those Canadians really went to war on snow with that one. They even hauled the resulting water away. Amazing.
The Mears lines north out of Silverton i model were like the Silverton Branch itself -- too many rocks embedded in the slides and drifts to run anything but wedge plows and snow shovels. But it's always interesting to see how others do things. All we have is a flanger -- and snow shovels.
There was a really weird rotary, of a sort, that ran in testing on the Alpine Pass line of the DSP&P/C&S up near Gunnison - the Jull. Never seen it modeled that I recall. It had a blade assembly that resembled a giant screw that angled down towards one rail at its front end, but rather like conventional rotaries from there back. A few were produced, but it turned out to be a design dead-end.
Mike Lehman
Urbana, IL
mlehmanWow, those Canadians really went to war on snow with that one. They even hauled the resulting water away. Amazing.
mlehmanThere was a really weird rotary, of a sort,...
That I think is yet a different one. I recall seeing a pic of the one Mike mentioned, the spiral cone sat at an angle to the track, not head on like that Cyclone thing.
You can be fairly sure that if it could move deep snow, the railroads probably at least tried it.
I found a picture of a jull, from here: http://www.owrhs.org/richs_models.html
Courtesey of Rich Cobb's modelshop, and the Ontario & Western RR. Historical Soc.
And, I do have one peice of snow equipment. It's never out, and I forgot I had it!
It's the only piece of brass I have.
Kind of a blurry picture.
EDIT: Check out Rich Cobb'sweb site, scroll to the bottom, and you'll see the picture I posted, along with a model that Rich built.
Check some of his other work, amazing stuff!
I have found photos of variations of the Barber-Greene Snow loaders in New Haven, New York Central, and Union Pacific service.
Barber-Greene is someone I hadn't heard of. Looks like they made lots of other machinery, but mostly non-RR. Still could make for some interesting loads with much of it.
https://vulcanhammer.info/2017/08/11/caldwell-steam-snow-plow/
Don't recall that one, either, but I'll bet the Jull and Caldwell folks spent lots of money on patent attorneys. I vaguely recall reading about such a conflict involving the Jull. Makes more sense now that I've seen the Caldwell.
I painted this brass one for a friend, a week or so ago...
...and after some weathering...
I recall that in a long-ago MR (60's maybe?) that one RR had a long-retired articulated steam loco modified to blow the exhaust steam (from one set of cylinders apparently) downward to melt the snow and ice from yard tracks.
I'd bet there would have been a long line of gray-beard engineers willing to take that task for a trip down memory lane.
Jim