Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
General Discussion (Model Railroader)
»
So how do i program Atlas QSI loco address?
Edit post
Edit your reply below.
Post Body
Enter your post below.
[quote user="MisterBeasley"]<p>STOP RIGHT THERE! And yes, I meant to shout.</p><p>If you program on the main, remember that you are programming ALL of your locomotives that are on the tracks and receiving the commands. You will set ALL of the addresses unless you remove all the other engines, or put them on dead sidings, etc.</p><p>That's why some DCC systems (like Lenz) won't even let you program an engine address on the main. If you look deep in the manual for the QSI chip, you'll find how to set an address even if that function is disabled for your DCC system.</p><p>[/quote]</p><p> </p><p>NO. This is WRONG. NCE does NOT support "broadcast" programming on the main! You CANNOT program a loco on the main unless it's the one you select. The ONLY way you can do this is if you have 2 or more that ALREADY have the same address. </p><p>The upcoming new release may support this, but ONLY if you specifically select it.</p><p>DO NOT PANIC. </p><p> </p>
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
Update Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up