Anthony - to the forums.
If you still have the box, does it mention on the end panel anything about DCC/Sound Equiped, or say Tsunami 2?
If not, it simply does not have a decoder installed.
If it does say that, sounds like the decoder was not put in properly at the factory, and I would return to either Athearn or place of purchase under warranty.
Ricky W.
HO scale Proto-freelancer.
My Railroad rules:
1: It's my railroad, my rules.
2: It's for having fun and enjoyment.
3: Any objections, consult above rules.
Anthony,
Does it make a buzzing sound? If so, then it's most likely DC and needs a decoder.
Do you still have the original box that your locomotive came in? The end panel should tell you whether it's DC or DCC.
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
Well i dont know if the one i have is dcc because it runs fine with my dc oval track but if i put it on my other track with my dcc it it makes a noise so it could be both.
anthony2021when i run it with my NCE Powercab It says short circut detected when i tried programing it and it was making a noice when i put it on the track any help?
Just for clarification: If your PowerCab detects a short it will cycle power off & on until the short is cleared - e.g. removing the locomotive from the track. Is that what is happening?
to the forum, your posts are delayed in moderation for the first few.
Since you just got it, take it back or see if Athearn will fix it under warranty. It could be a lose wire, a defective decoder but once you start monkeying with it, no one will cover the warranty.
Henry
COB Potomac & Northern
Shenandoah Valley
I just got a Athearn Genesis UP 1943 from my local hobby shop for $250 when i run it with my NCE Powercab It says short circut detected when i tried programing it and it was making a noice when i put it on the track any help?
Thanks to everyone. I called Soundtraxx today. They sent a complaint form. If less than 90 days old then they will replace no problems. Very easy to work with.
if you have a copy of the receipt where you bought it and its been less than a year Soundtraxx will replace it for cost of shipping it to them. make sure to get a RMA number from them before sending it in.
Colorado Front Range Railroad: http://www.coloradofrontrangerr.com/
I installed a Soundtraxx decoder. It didn't work, but they were happy to replace it. I give Soundtraxx high marks for customer service.
It takes an iron man to play with a toy iron horse.
I have to assume this a lightboard decoder board and not a shrink wrapped decoder.
My NCE Power Cab on the program track has protected me once.
Did you try a complete decoder reset?
I use double sided foam tape for mounting or a styrene board for the decoder board. Depends on the loco.
Electrical tape is too messy.
Kapton tape is thin and strong and comes from DCC companies.
Rich
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.
Please forgive me if this has been talked about before .
I recently installed a new tsunami 2 sound decoder in an Atlas gp38
As soon as I cranked up the power cab it read “short circuit detected. I tried another locomotive and it worked fine so I’m thinking the track is fine. Then I put the decoder in another loco and got nothing.
Im thinking I didn’t put electrical tape between the decoder and the motor. Hopefully Soundtrax will send another decoder without many problems. Anyone have any thoughts on this?