Doesn;t sound like the reset took. What decoder is it? Not all reset with CV8=8.
Writing 0 to CV19 definitely will work.The decoder will revert to using whatever individual address it had.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
Is it really that simple? I did a reset on one decoder, setting CV8 to 8, thinking that would for sure fix it and it hasn't ran since then. Address of 3 will not work, nor will the consist address or locomotive address.
Writing a value of CV19=0 for each locos will do it.
Jack W.
Hi All,
After years of dependable and reliable operation of a Prodigy Advance running my layout and having about 8-10 engines consisted together, those years came to an end. In an incident in which a giant blue electrical fire was involved-totally human error- the prodigy advance died.
Fortunately I can still run trains because I had purchased a digitrax Super Chief set with a DT400 throttle to be compliant with what my club has. All of the engine consists that I had on the layout survived the blue flame of death but they're still consisted together and still run on the consist address the Advance assigned to them.
Million Dollar question- How do I get these consists un-consisted using the Digitrax DT400?
Thanks in Advance!!