Driving it all properly from a BDL168 requires a bunch of extra relatively short detection sections and something to handle the logic. Making the crossing control independent of the track makes a lot more sense - the Logic Rail Grade Crossing Pro operates in a completely prototyical manner and does not tie in to the track power or track detection system.
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
I have a Grade Crossing Pro on a double track crossing using 4 photocells on each track for detection. I can not fathom why I would want my Loconet or any part of my Digitrax system to talk to the GCP. I installed the GCP with NJ Int. lights and a bell sound module about 8 or 9 years ago and it has worked flawlessly ever since.
READ the documentation that LogicRail makes available here: http://www.logicrailtech.com/documents.htm
Have fun, Ed
The CTA has allot of grade crossings, hard to imagine for a rapid transit line!!! The PATH train also used to have some couple bit only one remains today, which is not a public road. The No.5 train yards in the Bronx has flashing light grade crossings with no arms.
LION builds SUBWAY TRAINS! Him has no knead for crossing gates. (The last one on the BMT was removed in the 1960s --- It had a gate keeper with a crank who lowered the gates by hand.)
ROAR
The Route of the Broadway Lion The Largest Subway Layout in North Dakota.
Here there be cats. LIONS with CAMERAS
I have decided to use my Digitrax DS64 for my NJ international No.1164 and No.1192 grossing gates. I don't know if I can merge two crossing gates onto one input of the Digitrax DS64.
Sorry LOL, I meant to say Grade Crossing Pro. I only want to achieve the activation of lights gates and sound at the same time Speed and flash rate just makes things more unnecessarily complicated. Thanks for your help.
My company, Logic Rail Technologies, produces the Grade Crossing Pro (GCP) which is the product you're referring to. There's no such thing as a "Logic Rail Pro!"
Anyway, the GCP is a standalone product which doesn't inherently have anything to do with LocoNet or any other bus or network interface.
What aspect of "control" are you trying to achieve? Basic On/Off, flash rate, gate speed? About the only thing you could external to the GCP is force it to trigger (i.e. start flashing the signals). The remaining functionality is "self-contained."
Sincerely,
Chuck
I make these posting with the hope that someone may benefit some knowledge from them and run into something useful. Is the old saying I may know something that you don't know.
LOL
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
I would prefer that all of my accessories like a grade crossing to be controlled via Loconet. I have NJ international No.1164 and No.1192 grossing gates. I want to be able to control them with my Digitrax DB150 and Locobuffer II USB with PC. There is also the Grade Crossing Pro. I want sound for my grade crossing too. I don't know if the Logic Rail Pro can be integrated with Loconet via my DS64. Which will be the best recommended combination? I also saw this: http://www.ebay.com/itm/GRADE-CROSSINGS-BELL-SOUND-MODULE-SPEAKER-KIT-/390573380538?_trksid=p3284.m263&_trkparms=algo%3DSIC%26its%3DI%26itu%3DMRU-220%252BUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D21%26pmod%3D180971139768%26ps%3D54
Can the item listed above be integrated with Loconet?