Another word of warning -- NEVER run the vacuum portion of the track cleaning car at full throttle or you'll burn it up. I think even the instructions have this warning somewhere in them.
The vacuum cleaner is the only thing about the Atlas cleaning car that is of any use at all -- the cleaning fluid reservoir doesn't hold enough to clean more than about 10 feet of track, and the cleaning pads are too small do do a good job.
In my opinion, this car is a total waste of money.
Thanks! I'll give it a try.
Tim
Once decoder is installed , place on programming track. Turn the rotary switch on top to on then program like you would any other locomotive, Give it either a short or long address then mark the unit somewhere with the number. ---------- Ken
Hi all!
I have an Atlas HO scale track cleaning car that I installed a DCC decoder in. My intention is to use the vacuum feature on this car on my MW track cleaning train but I don't know how to program it to work. My layout is equipped with a Lenz DCC system.
Thanks!